Category: 80841-78-7

One of the major reasons is to use measurements of the macroscopic properties of a system, the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 80841-78-7, introduce a new downstream synthesis route. 80841-78-7

To BIC (110 g, 1 eq) was added acetone (385 mL, 3.5 vol) at 25C – 30C, and the mixture was dissolved by stirring for 5 min. Sodium carbonate (20.85 g, 1.3 eq) and potassium iodide (0.25 g, 0.01) were added, and the mixture was stirred for 10 min. A solution of 4-chloromethyl-5-methyl-2-oxo-1,3-dioxolene (31.456 g, 1.4 eq) in acetone (165 mL, 1.5 vol) was added thereto. The reaction mixture was heated to 45C – 50C, and stirred at the same temperature for 12 hr. Using TLC (thin layer chromatography) (TLC eluent: 10% methanol/methylene chloride, detection method: UV), complete disappearance of BIC was confirmed. The reaction mixture was cooled to 25C – 30C. Then, the solvent contained in the reaction mixture was evaporated under reduced pressure at 40C – 45C. To the obtained residue were added 10% brine (550 mL, 5 vol) and toluene (550 mL, 5 vol). Furthermore, the mixture was adjusted to pH 7 – 8 by adding 5% hydrochloric acid (33 mL), stirred for 10 min, left standing for 5 min and partitioned. The aqueous layer was extracted with toluene (2×330 mL, 2×3 vol). The extracts were combined with the organic layer, 10% brine (550 mL, 5 vol) was added, and the mixture was stirred for 5 min, left standing for 45 min, partitioned, and concentrated under reduced pressure at 40C – 45C to give TOLM (110 g, 90%). [0306] To the obtained TOLM was added acetone (110 mL, 1 vol), and the mixture was stirred at 25C – 30C for 30 min. n-Heptane (440 mL, 4 vol) was added, and the mixture was cooled to 5C – 10C and stirred at 5C – 10C for 30 min, whereby precipitation of a solid was confirmed. The solid (80 g, 66%) was collected by filtration, and blast dried. To the obtained solid was added isopropyl alcohol (400 mL, 5 vol), and the mixture was heated to 50C – 55C and stirred at 50C – 55C for 1 hr. Then, the mixture was cooled to 25C – 30C, and stirred at 25C – 30C for 1 hr. The resulting solid was filtered and suction-filtered for 10 min to give TOLM (76 g, 62%).

The chemical industry reduces the impact on the environment during synthesis, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; API Corporation; SEKI, Masahiko; EP2891650; (2015); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 80841-78-7, molecula formula is C5H5ClO3, below Introduce a new synthetic route., 80841-78-7

To BIC (110 g, 1 eq) was added acetone (385 mL, 3.5 vol) at 25C – 30C, and the mixture was dissolved by stirring for 5 min. Sodium carbonate (20.85 g, 1.3 eq) and potassium iodide (0.25 g, 0.01) were added, and the mixture was stirred for 10 min. A solution of 4-chloromethyl-5-methyl-2-oxo-1,3-dioxolene (31.456 g, 1.4 eq) in acetone (165 mL, 1.5 vol) was added thereto. The reaction mixture was heated to 45C – 50C, and stirred at the same temperature for 12 hr. Using TLC (thin layer chromatography) (TLC eluent: 10% methanol/methylene chloride, detection method: UV), complete disappearance of BIC was confirmed. The reaction mixture was cooled to 25C – 30C. Then, the solvent contained in the reaction mixture was evaporated under reduced pressure at 40C – 45C. To the obtained residue were added 10% brine (550 mL, 5 vol) and toluene (550 mL, 5 vol). Furthermore, the mixture was adjusted to pH 7 – 8 by adding 5% hydrochloric acid (33 mL), stirred for 10 min, left standing for 5 min and partitioned. The aqueous layer was extracted with toluene (2×330 mL, 2×3 vol). The extracts were combined with the organic layer, 10% brine (550 mL, 5 vol) was added, and the mixture was stirred for 5 min, left standing for 45 min, partitioned, and concentrated under reduced pressure at 40C – 45C to give TOLM (110 g, 90%). [0306] To the obtained TOLM was added acetone (110 mL, 1 vol), and the mixture was stirred at 25C – 30C for 30 min. n-Heptane (440 mL, 4 vol) was added, and the mixture was cooled to 5C – 10C and stirred at 5C – 10C for 30 min, whereby precipitation of a solid was confirmed. The solid (80 g, 66%) was collected by filtration, and blast dried. To the obtained solid was added isopropyl alcohol (400 mL, 5 vol), and the mixture was heated to 50C – 55C and stirred at 50C – 55C for 1 hr. Then, the mixture was cooled to 25C – 30C, and stirred at 25C – 30C for 1 hr. The resulting solid was filtered and suction-filtered for 10 min to give TOLM (76 g, 62%).

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps.

Reference£º
Patent; API Corporation; SEKI, Masahiko; EP2891650; (2015); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7, The molecularity is the number of molecules that collide during that step in the mechanism. If only a single reactant molecule in an elementary reaction, that step is designated as unimolecular; if there are two reactant molecules, it is bimolecular.80841-78-7. A new synthetic method of this compound is introduced below.

Example 2; 36.0 g (50.3 mmol) ethyl 4-(l -hydroxy- 1-methy lethyl)-2-propy 1-1- {4-[2-(trityltetrazol-5-y I)- phenyl]phenyl} -methyl imidazole-5-carboxylate (Va) and 3.0 g (75.4 mmol) of NaOH were suspended in 413 ml dimethylacetamide. The suspension was then stirred at room temperature for 20 h and after that 6.9 g (50.3 mmol) of K2CO3, were added. The mixture was cooled to 00C and solution of 15.4 g (70.4 mmol) 4-chloromethyl-5-methyl-2-oxo-l,3- dioxolene in 39 ml of dimethylacetamide were slowly added. The mixture was slowly heated to 500C and stirred at this temperature for 2 h. After esterification was completed, the mixture was cooled to 10 0C and poured into a mixture of 625 ml of ethyl acetate and 625 ml of 10 % NaCl, and stirred at 25 0C for 15 min. The phases were separated and organic phase was washed 2chi with 500 ml of 10 % NaCl, dried over Na2SO4 and filtered. The filtrate was concentrated up to 14 (approximately 270 g) at reduced pressure.To the resulting solution, 80 ml of ethanol and 8.3 ml (100 mmol) of cone. HCl were added EPO and stirred at 24-26C for 3h. To the cooled mixture 600 ml of water was added and pH of the suspension was estimated to 5 by addition of 5 M NaOH. The phases were stirred for 15 min and separated. Water phase was reextracted with 150 ml of ethyl acetate. Collected organic phases were dried over Na2SO4, filtered and concentrated under reduced pressure. 560 ml of ethyl acetate were added and the mixture was evaporated again. After that, 300 ml of ethyl acetate were added and the mixture was cooled to 20 0C and stirred for Ih, filtered off and washed with 20 ml of fresh ethyl acetate. The yield of the product (I) was 21 g (75 %).

The chemical industry reduces the impact on the environment during synthesis, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; KRKA; WO2007/17135; (2007); A2;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 80841-78-7, introduce a new downstream synthesis route. 80841-78-7

To a solution of the compound of Formula IV (5.0 g) in toluene (40 mL), dimethylacetamide (10 mL) is added, followed by addition of sodium hydroxide (1.2 g) and N,N-diisopropylamine (3.7 g) at 25-35C. The mixture is stirred at 40- 45C for 4 hours. 5-Methyl-2-oxo-(1 ,3-dioxolene-4-yl)methyl chloride (1.5 g) and tetrabutylammonium bromide (0.5 g) are added at 40-450C. The mixture is stirred at 60-70C for 8 hours. The mass is cooled to 25-35C, water (50 mL) is added, and the pH is adjusted to about 6-7 by adding 10% aqueous HCI. The layers are separated. The aqueous layer is extracted with toluene (25 mL). The organic layers are combined and washed with water (25 mL). The solvent is distilled under reduced pressure. Methanol (25 mL) is added to the residue. The mixture is cooled to 0-50C and stirred at that temperature for 45 minutes. The formed solid is filtered, washed with methanol (10 mL) and dried for 45 minutes under vacuum (yield 3.0 g).

The chemical industry reduces the impact on the environment during synthesis, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; DR. REDDY’S LABORATORIES LTD.; DR. REDDY’S LABORATORIES, INC.; KOLLA, Naveen Kumar; MANNE, Nagaraju; NAREDLA, Anitha; SHINDE, Sachin Gulabrao; WO2011/14611; (2011); A2;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7, The molecularity is the number of molecules that collide during that step in the mechanism. If only a single reactant molecule in an elementary reaction, that step is designated as unimolecular; if there are two reactant molecules, it is bimolecular.80841-78-7. A new synthetic method of this compound is introduced below.

In 130 ml of N,N-dimethyl acetamide, 14.5 g (20 mmol) of potassium 4-(2-hydroxypropan-2-yl)-2-propyl-1-((2′-(1-trityl-1H-tetrazol-5-yl)biphenyl-4-yl)methyl)-1H-imidazole-5-carboxylate, 3.0 g (2.2 mmol) of potassium carbonate powder and 1.4 g (8.4 mmol) of potassium iodide were added. The mixture was cooled to 0 C and 5.0 g (33 mmol) of 4-(chloromethyl)-5-methyl-1,3-dioxol-2-one was added at 0 to 5C. After the addition, the reaction mixture was warmed to 40-45 C within one hour, then the mixture was stirred at this temperature for 2h. The sample of reaction mixture was analysed (HPLC; tritylolmesartan medoxomil, 97.44%, 4-(2-hydroxypropan-2-yl)-2-propyl-1-((2′-(1-trityl-1H-tetrazol-5-yl)biphenyl-4-yl)methyl)-1H-imidazole-5-carboxylate 0.06 %). The mixture was cooled to 10 to 20C and then 250 ml of ethyl acetate was added. The mixture was cooled again to 5-10 C and then 200 ml of 10% NaCl was added slowly. The temperature should not be higher than 25 C during the addition. The phases were mixed separated and organic phase was washed with 100 ml of 10% NaCl (2*) and dried over anhydrous sodium sulphate. After the filtration filtrate was evaporated under reduced pressure at temperature under 45C to oily residue. To the residue 30 ml of acetonitrile was added at temperature not more than 45C. The mixture was stirred at this temperature for 10 minutes then was cooled to 20 to 25C and stirred at this temperature for 0.5 h and after that 3h at 0 to 5C. The suspension was filtered, washed with cold acetonitrile and dried at 40 to 50C. Yield: 17.0 g (91%) HPLC: 99.64 % of the product, all other impurities under 0.1%. IR: 3408, 1818, 1805, 1741, 1681, 1529, 1148, 1002, 699

The chemical industry reduces the impact on the environment during synthesis, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Krka Tovarna Zdravil, D.D., Novo Mesto; EP2334668; (2011); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 80841-78-7, molecula formula is C5H5ClO3, below Introduce a new synthetic route., 80841-78-7

Example 7; Preparation of Trityl Olmesartan Medoxomil4-(1-Hydroxy-1-methylethyl)-2-propyl-1-{4-[2-(trityltetrazol-5-yl)phenyl]phenyl}methylimidazole-5-carboxylic acid dehydrate (100 g) was suspended in acetone (1 L) & heated to reflux; the solution obtained was added to suspension of potassium carbonate (15 g), potassium iodide (6 g) & 4-chloromethyl-5-methyl-1,3-dioxol-2-one (35 g) in acetone (500 mL) at reflux temperature. Reaction mass was refluxed for 2-6 hrs. After competition of reaction, the reaction mass was filtered & the acetone was distilled from combined mother liquor. The residue obtained was dissolved in toluene (1 L) toluene layer was washed with brine (3¡Á250 mL). Toluene was removed under reduced pressure & residue thus obtained was recrystallized from methanol to give trityl OlmesartanMedoxomil (100 g).HPLC purity=99.5%

Elementary reactions that involve the simultaneous collision of more than three molecules are highly improbable and have never been observed experimentally.

Reference£º
Patent; Ramanjaneyulu, Gorantla Seeta; Mohan, Bandari; Ray, Purna Chandra; Sethi, Madhuresh Kumar; Rawat, Vijendra Singh; Krishna, Yerramalla Raja; Lakshminarayana, Vemula; Srinivas, Mamidi; US2009/281327; (2009); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 80841-78-7, molecula formula is C5H5ClO3, below Introduce a new synthetic route., 80841-78-7

Step B, go to the reaction solution of compound (II) obtained in Step A with stirring,Add 6.27kg of anhydrous sodium carbonate powder and 2.01kg of iodine, replace the air with nitrogen,The nitrogen pressure in the kettle is ?0.01Mpa, the control temperature is 50 ¡À 2 ,15.05 kg of compound (IV) was added dropwise at a constant pressure, and the addition was completed within 40 to 60 minutes.After the reaction was held for 1 hour, the reaction mixture was reduced to below 10 C.Extract with conventional solvents in an extraction kettle, wash with water, and separate the layers.The organic phase was distilled under reduced pressure to recover the solvent, crystallized, centrifuged,After drying, 54.88 kg of the crude compound (I) was obtained.Step C: Add 192.08 kg of ethyl acetate to the 500L refining kettle, start stirring,Add 54.88 kg of crude compound (I) obtained in step B, close the feed port,Keep the pressure ?0.01MPa after replacing air with nitrogen,The temperature was raised to 75 C and dissolved for 25 minutes until it was clear. The filtrate was filtered and the temperature was reduced to 2.5 C.Centrifuge, put the filter cake into the double cone dryer,Under reduced pressure, a small flow of nitrogen was passed in for replacement three times, and the drying temperature was controlled to 40-50 C.Vacuum degree ?-0.09MPa, after drying for 1 hour,Increase the drying temperature to 50 60 and continue drying for 3 hours.After cooling down, 53.60 kg of compound (1) was obtained, and the HPLC content was 99.87%.Compound (III) had a residual content of 0.06%.

The chemical industry reduces the impact on the environment during synthesis, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Shandong Xinhua Pharmaceutical Co., Ltd.; Zhu Lianbo; Wu Hui; Dou Guohua; (6 pag.)CN110590758; (2019); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one, cas is 80841-78-7. Here is a downstream synthesis route of the compound 80841-78-7, 80841-78-7

Example 3; Trityl olmesartan medoxomil (III); A solution of potassium salt 4 in methyl ethyl ketone from the preceding experiment (ca. 20 g of the salt) was diluted with methyl ethyl ketone (290 ml), and, after adding potassium iodide (2 g) and 4-chloromethyl-5-methyl-l,3-dioxol-2-one (7 g), the mixture was stirred at 50 0C for 7.5 h. After the reaction was completed, the mixture was filtered, and the filtrate was washed with methyl ethyl ketone (3 x 50 ml). After concentrating to ca. 160 ml in vacuo, ethanol (250 ml) was added, and the reaction mixture was again concentrated to ca. 300 ml in vacuo.The concentrated product in ethanol was inoculated and stirred at 50 0C for 0.5 h, and after getting thicker, diluted with ethanol (50 ml) and cooled to 20 C. The precipitated product was sucked off, washed with ethanol (2 x 20 ml) and dried in a vacuum drier at 50 C. 14.4 g (86 %) of the product was obtained.

Elementary reactions that involve the simultaneous collision of more than three molecules are highly improbable and have never been observed experimentally.

Reference£º
Patent; ZENTIVA, A.S.; WO2007/48361; (2007); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

The molecularity is the number of molecules that collide during that step in the mechanism. If only a single reactant molecule in an elementary reaction, that step is designated as unimolecular; if there are two reactant molecules, it is bimolecular.80841-78-7. A new synthetic method of this compound is introduced below., 80841-78-7

Example 3; Trityl olmesartan medoxomil (III); A solution of potassium salt 4 in methyl ethyl ketone from the preceding experiment (ca. 20 g of the salt) was diluted with methyl ethyl ketone (290 ml), and, after adding potassium iodide (2 g) and 4-chloromethyl-5-methyl-l,3-dioxol-2-one (7 g), the mixture was stirred at 50 0C for 7.5 h. After the reaction was completed, the mixture was filtered, and the filtrate was washed with methyl ethyl ketone (3 x 50 ml). After concentrating to ca. 160 ml in vacuo, ethanol (250 ml) was added, and the reaction mixture was again concentrated to ca. 300 ml in vacuo.The concentrated product in ethanol was inoculated and stirred at 50 0C for 0.5 h, and after getting thicker, diluted with ethanol (50 ml) and cooled to 20 C. The precipitated product was sucked off, washed with ethanol (2 x 20 ml) and dried in a vacuum drier at 50 C. 14.4 g (86 %) of the product was obtained.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products. The stepwise changes are collectively called the reaction mechanism.

Reference£º
Patent; ZENTIVA, A.S.; WO2007/48361; (2007); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7, The molecularity is the number of molecules that collide during that step in the mechanism. If only a single reactant molecule in an elementary reaction, that step is designated as unimolecular; if there are two reactant molecules, it is bimolecular.80841-78-7. A new synthetic method of this compound is introduced below.

To the flask was added 2000 g of acetone, 160 g of ethyl 4- (1-hydroxy-1-methylethyl) -2-propylimidazole-5-carboxylate (II), 150 g of K2CO3, 460 g of 4- [2- (Trityltetrazol-5-yl) phenyl] benzyl bromide (III), 20g KI, the temperature was raised to reflux, the reaction was incubated for 34-38 hours under stirring.Then add 102g KOH, reflux reaction 6 ~ 8h. Cool to 10 ~ 20 , add 170g DMDO-Cl, incubated for 30 ~ 60min.Heating to reflux, the reaction 22 to 26 hours.After the reaction was added 40g of diatomaceous earth, stirring for 30 to 60 minutes, suction filtration, 200g acetone rinse cake. To the filtrate was added 800g of drinking water and 200g of refined hydrochloric acid, the reaction at room temperature for 2 to 4 hours, filtered to remove by-product triphenylcarbinol. Dropping 10% K2CO3 aqueous solution, adjusting feedstock pH to 4, cooling to 10 ~ 20 , stirring crystallization 2h, filtration, the filter cake with a mixture of pre-cooled 45g acetone and 230g of drinking water washing and drying, to obtain Olmesartan Medoxomil 309 g, total yield 83.1% (relative to ethyl-4- (1-hydroxy-1-methylethyl) -2-propylimidazole-5- carboxylate (II)), purity: 99.27% of the main peak, 0.08% of the olmesartan acid, 0.14% of the triphenylmethanol, and 0.13% of the largest unidentified one.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps.

Reference£º
Patent; Zhejiang Huahai Zhicheng Pharmaceutical Co., Ltd.; Zhejiang Huahai Pharmaceutical Co., Ltd.; Jin Congyang; Wang Jiquan; Zhang Wenling; Wang Peng; (10 pag.)CN107311990; (2017); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem