Tag: M.W:100-200

80841-78-7,Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction by binding to a specific portion of an enzyme and thus slowing or preventing a reaction from occurring. Which mentioned a new discovery about 80841-78-7.

Example 1; Preparation of olmesartan medoxomilTo dimethyl acetamide (300 ml) was added 4-(1-hydroxy-1-methylethyl)-2-propyl imidazol- 5-carboxylic acid ethyl ester (50 gms) and powdered sodium hydroxide (26 gms). To this, 4-[2-(trityltetrazol-5-yl)phenyl]benzyl bromide (135 gms) was charged at 45-500C. The contents were stirred for 5 hours at 45-500C. Diisopropylethyl amine (100 ml) was charged to the reaction mass at 40-450C. A solution of 5-methyl-2-oxo-1 , 3-dioxane-4-yl)methyl chloride (80 gms) diluted with dimethyl acetamide (160 ml) was slowly added to the reaction mass at 40-450C over a period of 1 hour. The contents were heated to 60-650C and maintained for 4 hours. The reaction mass was then cooled to 30-350C and neutralized with concentrated hydrochloride acid. The reaction mass was filtered to remove inorganic impurities, charcoalized using charcoal (10 gms) andstirred for 30 minutes at 40-450C. The reaction mass was filtered over hyflo. The clear filtrate was acidified with hydrochloric acid (100 ml) slowly at 25-30C. The contents were stirred at 60C for 1 hour. The reaction mass was chilled to 0-5C and filtered to remove tritanol. The reaction mass was concentrated under reduced pressure. The residue was quenched with water (500ml), neutralized with base and extracted in dichloromethane (500 ml). The clear dichloromethane extract was then concentrated under reduced pressure and stripped off with acetone. The residue thus obtained was isolated from acetone (250 ml) to give 55 gms of the title compound. Chromatographic purity- > 99%; Example 2Preparation of olmesartan medoxomilTo dimethyl acetamide (600 ml) was added 4-(1-hydroxy-1-methylethyl)-2-propyl imidazol- 5-carboxylic acid ethyl ester (100 gms) and powdered potassium hydroxide (50 gms). To this was charged 4-[2-(trityltetrazol-5-yl)phenyl]benzyl bromide (270 gms) at 45-50C. The contents were stirred for 5 hours at 45-50C. Diisopropylethyl amine (200 ml) was charged to the reaction mass at 40-450C. To this was slowly added a solution of 5-methyl-2-oxo- 1 ,3-dioxane-4-yl)methyl chloride (160 gms) diluted with dimethyl acetamide (320 ml) at 40- 45C over a period of 1 hour. The contents were heated to 60-650C and maintained for 4 hours. The reaction mass was then cooled to 30-350C and was neutralized with concentrated hydrochloride acid. The reaction mass was filtered to remove inorganic impurities. The reaction mass was charcoalized using charcoal (20 gms) and was stirred for 30 minutes at 40-450C. The reaction mass was filtered over hyflo. The clear filtrate was acidified with hydrochloric acid (200 ml) slowly at 25-300C. The contents were stirred at 60C for 1 hour. The reaction mass was chilled to 0-50C and was filtered to remove tritanol. The reaction mass was concentrated under reduced pressure. The residue was quenched with water (1000 ml), neutralized with base and extracted in dichloromethane (1000 ml). The clear dichloromethane extract was then concentrated under reduced pressure, stripped off with acetone. The residue thus obtained was isolated from the acetone (500 ml) to give 110 gms of the title compound. Chromatogrphic purity- > 99%; Example 4Preparation of trityl olmesartan medoxomilTo dimethyl acetamide (300 ml) was added 4-(1-hydroxy-1-methylethyl)-2-propyl imidazol- 5-carboxylic acid ethyl ester (50 gms) and powdered potassium hydroxide (25 gms). To this was charged 4-[2-(trityltetrazol-5-yl)phenyl]benzyl bromide (135 gms) at 45-500C. The contents were stirred for 5 hours at 45-500C. Diisopropylethyl amine (100 ml) was charged to the reaction mass at 40-45C. To this was slowly added a solution of 5-methyl-2-oxo- 1 ,3-dioxane-4-yl) methyl chloride (80 gms) diluted with dimethyl acetamide (160 ml) at 40- 45C over a period of 1 hour. The contents were heated to 60-650C and maintained for 4 hours. The reaction mass was then cooled to 30-350C. and was neutralized with concentrated hydrochloride acid. The reaction mass was filtered to remove inorganics. The reaction mass was charcoalized using charcoal (10 gms) and was stirred for 30 minutes at 40-450C. The reaction mass was filtered over hyflo. The clear filtrate was quenched with purified water(200 ml)at 25-30C over a period of 3-4 hours. The contents were stirred at 25-300C for 30 minutes. Crude trityl olmesartan medoxomil was isolated by filtration, slurried in water (500 ml), centrifuged and dried under reduced pressure at 45-50C.

Do you like my blog? If you like, you can also browse other articles about this kind. Thanks for taking the time to read the blog about 80841-78-7

Reference£º
Patent; CIPLA LIMITED; CURTIS, Philip, Anthony; WO2008/43996; (2008); A2;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

Chemistry is the experimental and theoretical study of materials on their properties at both the macroscopic and microscopic levels. 80841-78-7. In a patent£¬Which mentioned a new discovery about 80841-78-7, molcular formula is C5H5ClO3, introducing its new discovery.

Example 5: The reaction part was charged with ethyl 4- (1-hydroxy-1-methylethyl) -2-propyl-1- {4- [2- (trityltetrazol-5-yl) phenyl] 22 g of 5-carboxylate (Formula 4), 3.1 g of sodium hydroxide and 90 mL of ethanol were added and the mixture was stirred at 20 to 25 C for 4 to 5 hours. When the reaction was completed, the reaction solution was concentrated. To the residue were added 50 mL of ethyl acetate and 50 mL of purified water. The mixture was stirred for 1 hour and then layered. The separated organic layer was washed twice with an aqueous solution containing 30 g of salt and 170 mL of purified water. 1 g of activated carbon and 20 g of anhydrous sodium sulfate were added to the organic layer, followed by stirring for 30 minutes to 1 hour, followed by filtration Respectively. After the filtrate was concentrated under reduced pressure, 50 mL of N, N-dimethylacetamide was added to the residue, the temperature was adjusted to 5 to 10 DEG C 4 g of potassium carbonate was added and 6.2 g of 4- (chloromethyl) -5-methyl-1,3-dioxol-2-one (Formula 6) was dissolved in N, N-dimethylacetamide 6 ML was added dropwise, and the mixture was reacted at 45 to 50 C for 4 hours with stirring. When the reaction is completed, the reaction solution is cooled to 20 to 25 After cooling, 220 mL of ethyl acetate, 30 g of salt and 170 mL of purified water were added successively. The organic layer was separated And then washed once more with an aqueous solution containing 30 g of salt and 170 mL of purified water. The organic layer was washed with 1 g of activated carbon, 20 g of sodium was added and stirred for 30 minutes to 1 hour, followed by filtration. The filtrate was concentrated under reduced pressure, and then acetone 100 mL of i-tril was added, and the mixture was stirred at 50 to 55 C for 1 hour. The crystals were cooled to 0 to 5 [deg.] C and stirred for 2 hours. Followed by washing with 50 mL of isopropyl alcohol, followed by drying to obtain 21.6 g (yield: 88%) of tritylolemecanemethoxysilane (formula 1a) Purity 99.97%) was obtained

Note that a catalyst decreases the activation energy for both the forward and the reverse reactions and hence accelerates both the forward and the reverse reactions.80841-78-7, you can also check out more blogs about80841-78-7

Reference£º
Patent; DONGBANG FTL CO., LTD; Song, Tae Hong; Jung, Hun Suk; Jang, Do Yeon; Moon, Chung Sun; Jung, Hee Jung; (18 pag.)KR101526249; (2015); B1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

37830-90-3,is a common compound. C5H6O3.In an article, once mentioned the new application about 37830-90-3.

Compound 20 was prepared following the steps disclosed in the literature (Sakamoto er a/., Chem. Pharm. Bull, 1984, 32, 2241).

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 37830-90-3, help many people in the next few years.C5H6O3

Reference£º
Patent; ANCHEN LABORATORIES, INC; WO2009/118580; (2009); A2;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

37830-90-3,In homogeneous catalysis, the catalyst is in the same phase as the reactant. The number of collisions between reactants and catalyst is at a maximum.In a article,4,5-Dimethyl-1,3-dioxol-2-one,introducing its new discovery.

Step III: 4-Bromomethyl-5-methyl~l,3-dioxol~2-one; A mixture of 4,5-dimethyl-l,3-dioxol-2-one (1.5 g, 0.013158 mol), NBS (2.34 g, 0.013158 mol) and benzoyl peroxide (0.089 g, 0.0003684 mol) in CCl4 (20 mL) was stirred at 77¡ãC for 6 hrs (TLC monitoring: cyclohexane/AcOEt 6:4). The solution was treated with an aqueous solution OfNaHCO3 and extracted with CH2Cl2. The organic phase was dried over Na2SO4 and concentrated under reduced pressure to give 4-bromomethyl-5 -methyl- 1,3- dioxol-2-one (2.34 g). Yield: 92percent.1H-NMR (400 MHz, CDCl3, delta): 2.13 (s, 3H, CH3), 4.18 (s, 2H, CH2Br).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4,5-Dimethyl-1,3-dioxol-2-one.C5H6O3

Reference£º
Patent; S.I.M.S. S.r.l. – SOCIETA ITALIANA MEDICINALI SCANDICCI; WO2008/12852; (2008); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7,Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction by binding to a specific portion of an enzyme and thus slowing or preventing a reaction from occurring. Which mentioned a new discovery about 80841-78-7.

Step B, go to the reaction solution of compound (II) obtained in Step A with stirring,Add 6.27kg of anhydrous potassium carbonate powder and2.01kg iodine, replace the air with nitrogen, the nitrogen pressure in the kettle is ?0.01Mpa,The temperature was controlled at 50 ¡À 2 , and 13.80 kg of compound (IV) was added dropwise at a constant pressure.Add within 40 to 60 minutes. After the incubation reaction for 1.25 hours,Reduce the reaction mixture to below 10 C, extract with conventional solvents in an extraction kettle, wash with water, and separate the layers.The organic phase was distilled under reduced pressure to recover the solvent, crystallized, centrifuged,Drying gave 55.03 kg of crude compound (I).Step C: Add 192.61 kg of ethyl acetate to the 500L refining kettle, start stirring,55.03 kg of the crude compound (I) obtained in step B is added, and the feeding port is closed,Keep the pressure ?0.01MPa after replacing air with nitrogen,The temperature was raised to 75 C and dissolved for 25 minutes until it was clear. The filtrate was filtered and the temperature was reduced to 2.5 C.Centrifuge, put the filter cake into the double cone dryer,Under reduced pressure, a small flow of nitrogen was passed in for replacement three times, and the drying temperature was controlled to 40-50 C.Vacuum degree ?-0.09MPa, after drying for 1 hour,Increase the drying temperature to 50 60 and continue drying for 3 hours.54.06kg compound (1) finished product,The HPLC content was 99.93%, and the residual content of the compound (III) was 0.05%.

Enzymes are biological catalysts that produce large increases in reaction rates and tend to be specific for certain reactants and products. I hope my blog about 80841-78-7 is helpful to your research. 80841-78-7

Reference£º
Patent; Shandong Xinhua Pharmaceutical Co., Ltd.; Zhu Lianbo; Wu Hui; Dou Guohua; (6 pag.)CN110590758; (2019); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

37830-90-3,In homogeneous catalysis, the catalyst is in the same phase as the reactant. The number of collisions between reactants and catalyst is at a maximum.In a article,4,5-Dimethyl-1,3-dioxol-2-one,introducing its new discovery.

To a stirred solution of 4, 5-dimethyl-l, 3-dioxol-2-one (4.5 g, 39.4 mmol) in benzene (150 mL), were added NBS (15.44 g, 87 mmol) and AIBN (0.648 g, 3.94 mmol). The reaction mixture was stirred at 1 10 C for 2 h under nitrogen atmosphere and subsequently concentrated in vacuo. The residue was dissolved in ethyl acetate (200 mL). The solution was washed with water (2* 150 mL) and brine (100 mL), dried over anhydrous sodium sulphate and concentrated in vacuo to get the crude product as a light brownish oil, which was purified by CombiFlash chromatography (60-120 silica gel; 5- 55% ethyl acetate in pet. ether as eluent) to afford 4,5 -bis (bromomethyl)-l,3-dioxol-2- one (7 g, 66%) as a light yellowish oil. NMR (400 MHz, Chloroform-7) d ppm 4.22 (s, 4H).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4,5-Dimethyl-1,3-dioxol-2-one.C5H6O3

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; BALOG, James Aaron; SEITZ, Steven P.; WILLIAMS, David K.; ANDAPPAN MURUGAIAH SUBBAIAH, Murugaiah; (191 pag.)WO2019/136112; (2019); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

Chemistry is the experimental and theoretical study of materials on their properties at both the macroscopic and microscopic levels. 80841-78-7. In a patent£¬Which mentioned a new discovery about 80841-78-7, molcular formula is C5H5ClO3, introducing its new discovery.

Example 1(1) Tritylation and DMDO Esterification ReactionsAfter mixing 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2′-[1H-tetrazol-5-yl]biphenyl-4-yl]methyl]imidazole-5-carboxylic acid (30 g), acetone (210 mL), 1,8-diazabicyclo[5,4,0]-7-undecene [DBU] (25.5 g) and triphenylmethyl chloride [TPC] (23.79 g), water (0.6 mL) was added and acetone (30 mL) was poured into the mixture, and the reaction mixture was stirred at 48 to 52 C. for 2 hours. Then, water (0.9 mL) was added and 4-chloromethyl-5-methyl-1,3-dioxol-2-one [DMDO-Cl] (18.5 g) was poured in, and the reaction mixture was stirred at 48 to 52 C. for 5 hours.(2) Obtaining Crude Crystals of Trityl Olmesartan Medoxomil (Acetone Solvate Crystals)After the reaction mixture was cooled to 20 C. to precipitate crystals, it was stirred at 15 to 25 C. for 40 minutes, and water (96 mL) was added dropwise over a period of 25 minutes, and then the reaction mixture was cooled to 0 to 5 C. and stirred for 30 minutes. The precipitated crystals were filtered out and washed with acetone-water (150 mL), and wet crude crystals of (5-methyl-2-oxo-1,3-dioxolen-4-yl)methyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2′-[2-(triphenylmethyl)-2H-tetrazol-5-yl]biphenyl-4-yl]methyl]imidazole-5-carboxylate (57.83 g) were obtained. These were then dried in vacuo at 60 C. for approximately 15 hours, and the dry acetone solvate crystals (57.50 g) were obtained.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 80841-78-7, help many people in the next few years.C5H5ClO3

Reference£º
Patent; DAIICHI SANKYO COMPANY, LIMITED; US2012/59172; (2012); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7,Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction by binding to a specific portion of an enzyme and thus slowing or preventing a reaction from occurring. Which mentioned a new discovery about 80841-78-7.

(3) the C43 H39 N6 NaO3 AMST – 4 and DMF added in a reaction kettle, lowering the temperature to 0 C, adding potassium carbonate, maintain 0 C dropwise C5 H5 ClO3 AMST – 5 dissolved in DMF solution, after the completion of the dropping 85 C reaction 4 hours, monitoring the reaction is finished adding water, sodium chloride and ethyl acetate stirring extraction, liquid, separating the upper organic phase, a mixed solution of water and sodium chloride washing, separating the organic phase at upper layer for sodium sulfate drying, filtering, 60 C concentrated to the reagent, in acetonitrile for 30 C beating 1 hour, cooling to 25 C, filtering, cake isopropyl alcohol leaching, 75 C drying to constant weight to obtain the product C48 H44 N6 O6 AMST – 6; the C43 H39 N6 NaO3 AMST – 4, DMF, potassium carbonate, C5 H5 ClO3 AMST – 5, ethyl acetate, acetonitrile, water, sodium chloride and sodium sulfate the mass ratio of the 192:560: 62:1500: 1000:1500: 300:50;

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one.C5H5ClO3

Reference£º
Patent; Jiangxi Yong Tong Technology Co., Ltd.; Liu Zhongchun; (10 pag.)CN107311989; (2017); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

37830-90-3,is a common compound. C5H6O3.In an article, once mentioned the new application about 37830-90-3.

PREPARATION 1 4-Bromomethyl-5-methyl-2-oxo-1,3-dioxole To a stirred solution of 3.0 g of 4,5-dimethyl-2-oxo-1,3-dioxole in 100 ml of carbon tetrachloride was added 4.63 g of N-bromosuccinimide. The resulting solution was heated under reflux and irradiated for 15 minutes. The reaction mixture was cooled to 0¡ã-5¡ã C., filtered and evaporated to give the title product. The NMR spectrum (CDCl3) showed absorptions at 2.05 (5percent of starting material), 2.18 (3H, s), 4.30 (2H, s) and 4.35 (5percent of dibromo compound) ppm downfield from tetramethylsilane. The infrared spectrum showed an absorption at 5.49 microns., 37830-90-3

One of the oldest and most widely used commercial enzyme inhibitors is aspirin, which selectively inhibits one of the enzymes involved in the synthesis of molecules that trigger inflammation. you can also check out more blogs about 37830-90-3.C5H6O3

Reference£º
Patent; Pfizer Inc.; US4448732; (1984); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

In an article, published in an article,once mentioned the application of 80841-78-7,molecular formula is , is a conventional compound. this article was the specific content is as follows. 80841-78-7

Example 4; The reaction was carried out in the same manner as in Example 1 except that 4- (1-hydroxy-1-methylethyl) -2-propyl-1- {4- [2- (trityltetrazol-5-yl) phenyl] -carboxylic acid sodium salt (Chemical Formula 5) and 50 mL of N, N-dimethylacetamide were added, the temperature was adjusted to 5 to 10 DEG C and 4 g of potassium carbonate was added. A solution of 6.2 g of 4- (chloromethyl) -5-methyl-1,3-dioxol-2-one (Formula 6) in 6 mL of N, N-dimethylacetamide was added dropwise to the reaction portion, For 4 hours. After the reaction was completed, the reaction solution was cooled to 20 to 25 C, and then 220 mL of ethyl acetate, 30 g of salt, and 170 mL of purified water were sequentially added to the reaction mixture, followed by separation of the organic layer, followed by the addition of 30 g of salt and 170 mL of purified water . & Lt; / RTI & gt; 1 g of activated carbon and 20 g of anhydrous sodium sulfate were added to the organic layer, followed by stirring for 30 minutes to 1 hour, followed by filtration. The filtrate was concentrated under reduced pressure, and 100 mL of acetonitrile was added to the residue, followed by stirring at 50 to 55 DEG C for 1 hour. The crystals were cooled to 0 to 5 C., stirred for 2 hours, filtered, washed with 50 mL of isopropyl alcohol and dried to obtain 21.7 g (yield: 93%, purity: 99.96%) of tritylolemethanemethoxysilane

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one.C5H5ClO3

Reference£º
Patent; DONGBANG FTL CO., LTD; Song, Tae Hong; Jung, Hun Suk; Jang, Do Yeon; Moon, Chung Sun; Jung, Hee Jung; (18 pag.)KR101526249; (2015); B1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem