Dioxole related

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.144690-92-6,Triphenyl methyl olmesartan,as a common compound, the synthetic route is as follows.

Trityl olmesartan medoxomil (8 g, 10 mmol) is dissolved in THF (25 ml) and diethyl ether (25 ml) and 48 % aqueous hydrobromic acid (3.5 ml, 30 mmol) is added. The mixture is stirred for 1 hour at room temperature and then 1 hour at 0 C. The precipitate is filtered, washed with cold THF (20 ml) and dried overnight in vacuum at room temperature to give 5.0 g of olmesartan medoxomil hydrobromide Form B

144690-92-6 Triphenyl methyl olmesartan 19036162, aDioxole compound, is more and more widely used in various.

Reference£º
Patent; LEK Pharmaceuticals d.d.; EP2022790; (2009); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37830-90-3,4,5-Dimethyl-1,3-dioxol-2-one,as a common compound, the synthetic route is as follows.

Example 17 Preparation of 5-methyl-4-hydroxymethyl-2-oxo-1,3-dioxolene A solution of 4,5-dimethyl-2-oxo-1,3-dioxolene (1 mmol) and selenium dioxide (2.5 mmol) in dioxane was heated at reflux for 1 h. Evaporation, extraction and chromatography gave 5-methyl-4-hydroxymethyl-2-oxo-1,3-dioxolene as a yellow oil. TLC: Rf=0.5, 5percent MeOH-dichloromethane.

37830-90-3 4,5-Dimethyl-1,3-dioxol-2-one 142210, aDioxole compound, is more and more widely used in various.

Reference£º
Patent; Metabasis Therapeutics, Inc.; US6284748; (2001); B1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.80841-78-7,4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one,as a common compound, the synthetic route is as follows.

To the flask was added 2000 g of acetone, 160 g of ethyl 4- (1-hydroxy-1-methylethyl) -2-propylimidazole-5-carboxylate (II), 150 g of K2CO3, 460 g of 4- [2- (Trityltetrazol-5-yl) phenyl] benzyl bromide (III), 20g KI, the temperature was raised to reflux, the reaction was incubated for 34-38 hours under stirring.Then add 102g KOH, reflux reaction 6 ~ 8h. Cool to 10 ~ 20 , add 170g DMDO-Cl, incubated for 30 ~ 60min.Heating to reflux, the reaction 22 to 26 hours.After the reaction was added 40g of diatomaceous earth, stirring for 30 to 60 minutes, suction filtration, 200g acetone rinse cake. To the filtrate was added 800g of drinking water and 200g of refined hydrochloric acid, the reaction at room temperature for 2 to 4 hours, filtered to remove by-product triphenylcarbinol. Dropping 10% K2CO3 aqueous solution, adjusting feedstock pH to 4, cooling to 10 ~ 20 , stirring crystallization 2h, filtration, the filter cake with a mixture of pre-cooled 45g acetone and 230g of drinking water washing and drying, to obtain Olmesartan Medoxomil 309 g, total yield 83.1% (relative to ethyl-4- (1-hydroxy-1-methylethyl) -2-propylimidazole-5- carboxylate (II)), purity: 99.27% of the main peak, 0.08% of the olmesartan acid, 0.14% of the triphenylmethanol, and 0.13% of the largest unidentified one.

As the paragraph descriping shows that 80841-78-7 is playing an increasingly important role.

Reference£º
Patent; Zhejiang Huahai Zhicheng Pharmaceutical Co., Ltd.; Zhejiang Huahai Pharmaceutical Co., Ltd.; Jin Congyang; Wang Jiquan; Zhang Wenling; Wang Peng; (10 pag.)CN107311990; (2017); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.80841-78-7,4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one,as a common compound, the synthetic route is as follows.

(3) the C43 H39 N6 NaO3 AMST – 4 and DMF added in a reaction kettle, lowering the temperature to 0 C, adding potassium carbonate, maintain 0 C dropwise C5 H5 ClO3 AMST – 5 dissolved in DMF solution, after the completion of the dropping 85 C reaction 4 hours, monitoring the reaction is finished adding water, sodium chloride and ethyl acetate stirring extraction, liquid, separating the upper organic phase, a mixed solution of water and sodium chloride washing, separating the organic phase at upper layer for sodium sulfate drying, filtering, 60 C concentrated to the reagent, in acetonitrile for 30 C beating 1 hour, cooling to 25 C, filtering, cake isopropyl alcohol leaching, 75 C drying to constant weight to obtain the product C48 H44 N6 O6 AMST – 6; the C43 H39 N6 NaO3 AMST – 4, DMF, potassium carbonate, C5 H5 ClO3 AMST – 5, ethyl acetate, acetonitrile, water, sodium chloride and sodium sulfate the mass ratio of the 192:560: 62:1500: 1000:1500: 300:50;

As the paragraph descriping shows that 80841-78-7 is playing an increasingly important role.

Reference£º
Patent; Jiangxi Yong Tong Technology Co., Ltd.; Liu Zhongchun; (10 pag.)CN107311989; (2017); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 3; Trityl olmesartan medoxomil (III); A solution of potassium salt 4 in methyl ethyl ketone from the preceding experiment (ca. 20 g of the salt) was diluted with methyl ethyl ketone (290 ml), and, after adding potassium iodide (2 g) and 4-chloromethyl-5-methyl-l,3-dioxol-2-one (7 g), the mixture was stirred at 50 0C for 7.5 h. After the reaction was completed, the mixture was filtered, and the filtrate was washed with methyl ethyl ketone (3 x 50 ml). After concentrating to ca. 160 ml in vacuo, ethanol (250 ml) was added, and the reaction mixture was again concentrated to ca. 300 ml in vacuo.The concentrated product in ethanol was inoculated and stirred at 50 0C for 0.5 h, and after getting thicker, diluted with ethanol (50 ml) and cooled to 20 C. The precipitated product was sucked off, washed with ethanol (2 x 20 ml) and dried in a vacuum drier at 50 C. 14.4 g (86 %) of the product was obtained.

As the paragraph descriping shows that 80841-78-7 is playing an increasingly important role.

Reference£º
Patent; ZENTIVA, A.S.; WO2007/48361; (2007); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

37830-90-3, 4,5-Dimethyl-1,3-dioxol-2-one is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Add 50.0 g of 4,5-dimethyl-1,3-dioxol-2-one to a 1 L four-necked flask.530 g of dichloromethane, stirred and dissolved, and heated to reflux, when the internal temperature is not lower than 40 ¡ã C,A mixture of 65 g (1.1 equivalents) of sulfonyl chloride and 132 g of dichloromethane was added dropwise.The internal temperature of the control is not lower than 40 ¡ãC, and the mixture is kept warm for 2 hours after the dropwise addition.The temperature was then raised to 85 ¡ã C while distilling off the dichloromethane. When it reaches 85 ¡ã C, it is rearranged for 2 to 3 hours.At room temperature, crude DMDO-Cl was obtained with a GC purity of 85percent to 90percent.Add 30 ml of isopropanol to the above crude product, stir and cool to -10 ¡ã C ~ -5 ¡ã C,Crystallization 0 ~ 1h, suction filtration, rinse with isopropanol down to -5 ¡ã C,Obtained white crystals 53.3g (yield 81.9percent, GC purity 99.3percent)

37830-90-3 4,5-Dimethyl-1,3-dioxol-2-one 142210, aDioxole compound, is more and more widely used in various.

Reference£º
Patent; Zhejiang Huahai Pharmaceutical Co., Ltd.; Wang Jiquan; Li Guoxiang; Xiong Xueqiang; (6 pag.)CN103864748; (2019); B;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.144690-92-6,Triphenyl methyl olmesartan,as a common compound, the synthetic route is as follows.

A solution of MTT in an organic solvent and water (20%) was heated for 4-8 hrs at reflux. When the solvents were either acetonitrile (ACN), isopropyl alcohol (IPA) or t-butanol (t-BuOH), 1 volume of water was added, and the reaction was stirred until the amount of MTT was less than 2%. The mixture was evaporated to dryness. Ethyl acetate (EtOAc, 1 volume) was added to the residue and then evaporated again (twice). The resulting solid was dissolved in EtOAc (12 vol) and heated to reflux. The solution was cooled (2 C.) and stirred for 2 hrs. The product was filtered, washed (EtOAc, 1 vol), and dried on vacuum (45 C.). Table 1 shows the process details with different organic solvents: TABLE 1 Total solvent Time Solvent(s) Volume Temperature ( C.) (hrs) pH ACN:H2O 5:1 + 1 85 7 4.89-4.3 IPA:H2O 5:1 + 1 85 7 4.62-4.25t-BuOH:H2O 5:1 + 1 85 7 4.78-4.28n-propanol:H2O 5:1 reflux 2.5 4.3n-BuOH:H2O 5:1 110 2.5 4.412-BuOH:H2O 5:1 100 3 4.5iso-penthanol:H2O 5:1 100 3 5DMA:H2O 5:1 100 4 4.5DMF:H2O 5:1 100 4 4.5

The synthetic route of 144690-92-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Hedvati, Lilach; Pilarsky, Gideon; Shenkar-Garcia, Natalia; US2006/148870; (2006); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

144690-92-6, Triphenyl methyl olmesartan is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Trityl olmesartan medoxomil (8 g, 10 mmol) is dissolved in THF (50 ml) and 48 % aqueous hydrobromic acid (3.5 ml, 30 mmol) is added. The mixture is stirred for 1 hour at room temperature and then 1 hour at 0 C. The precipitate is filtered, washed with cold THF (20 ml) and dried overnight in vacuum at room temperature to give 5.7 g of olmesartan medoxomil hydrobromide Form B (98.6 % area)

As the paragraph descriping shows that 144690-92-6 is playing an increasingly important role.

Reference£º
Patent; LEK Pharmaceuticals d.d.; EP2022790; (2009); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.144690-92-6,Triphenyl methyl olmesartan,as a common compound, the synthetic route is as follows.

The reaction flask was charged with 400 g of compound VII (0.50 mol) and 70% aqueous acetic acid solution of 3200 ml, Reaction was carried out at 50 C for 2 hours. After the completion of the reaction, the solvent was concentrated and concentrated, and ammonia was added to the residue.PH = 7, extracted with 1400 ml of ethyl acetate, the ethyl acetate layer was washed with water, and finally with anhydrous sodium sulfateDried; filtered, the filtrate was concentrated to dryness and the residue was recrystallized from ethanol to give the compound I pure product 256.1G, yield: 91.79%.

144690-92-6 Triphenyl methyl olmesartan 19036162, aDioxole compound, is more and more widely used in various.

Reference£º
Patent; Hunan Ouya biological Co. Ltd.; Lin, kaizhao; (19 pag.)CN103304550; (2016); B;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.80841-78-7,4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one,as a common compound, the synthetic route is as follows.

Example 1(1) Tritylation and DMDO Esterification ReactionsAfter mixing 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2′-[1H-tetrazol-5-yl]biphenyl-4-yl]methyl]imidazole-5-carboxylic acid (30 g), acetone (210 mL), 1,8-diazabicyclo[5,4,0]-7-undecene [DBU] (25.5 g) and triphenylmethyl chloride [TPC] (23.79 g), water (0.6 mL) was added and acetone (30 mL) was poured into the mixture, and the reaction mixture was stirred at 48 to 52 C. for 2 hours. Then, water (0.9 mL) was added and 4-chloromethyl-5-methyl-1,3-dioxol-2-one [DMDO-Cl] (18.5 g) was poured in, and the reaction mixture was stirred at 48 to 52 C. for 5 hours.(2) Obtaining Crude Crystals of Trityl Olmesartan Medoxomil (Acetone Solvate Crystals)After the reaction mixture was cooled to 20 C. to precipitate crystals, it was stirred at 15 to 25 C. for 40 minutes, and water (96 mL) was added dropwise over a period of 25 minutes, and then the reaction mixture was cooled to 0 to 5 C. and stirred for 30 minutes. The precipitated crystals were filtered out and washed with acetone-water (150 mL), and wet crude crystals of (5-methyl-2-oxo-1,3-dioxolen-4-yl)methyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2′-[2-(triphenylmethyl)-2H-tetrazol-5-yl]biphenyl-4-yl]methyl]imidazole-5-carboxylate (57.83 g) were obtained. These were then dried in vacuo at 60 C. for approximately 15 hours, and the dry acetone solvate crystals (57.50 g) were obtained.

As the paragraph descriping shows that 80841-78-7 is playing an increasingly important role.

Reference£º
Patent; DAIICHI SANKYO COMPANY, LIMITED; US2012/59172; (2012); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem