Dioxole related

144690-92-6, Triphenyl methyl olmesartan is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

78(b) (5-Methyl-2-oxo-1,3-dioxolen-4-yl)methyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-{4-[2-(tetrazol-5-yl)phenyl]phenyl}methylimidazole-5-carboxylate 75 ml of water were added to a suspension of 29.3 g of (5-methyl-2-oxo-1,3-dioxolen-4-yl)methyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-{4-[2-(trityltetrazol-5-yl)phenyl]phenyl}methylimidazole-5-carboxylate [prepared as described in step (a) above] in 225 ml of acetic acid, and the resulting mixture was stirred at 60 C. for 1.5 hours. At the end of this time, 75 ml of water were added to the mixture, which was then cooled. Precipitated trityl alcohol was removed by filtration, and the filtrate was concentrated by evaporation under reduced pressure. Toluene was added to the residue, and the mixture was again concentrated by evaporation under reduced pressure, to remove the remaining water and acetic acid. The residue was crystallized in ethyl acetate, to give 16.6 g of the title compound as crystals, melting at 177-180 C. (with decomposition). The Nuclear Magnetic Resonance Spectrum of this compound was identical with that of the compound obtained as described in Example 61(b).

As the paragraph descriping shows that 144690-92-6 is playing an increasingly important role.

Reference£º
Patent; Sankyo Company, Limited; US5616599; (1997); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

144690-92-6, Triphenyl methyl olmesartan is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1L glass reaction flask was added with 500ml of 75% acetic acid, 100.0g of intermediate 2 was added with stirring, and the mixture was heated to stirAfter 45-55 C, after 2 hours of incubation, reduce the temperature to 20-30 C, add 125ml of water, stir for 30 minutes, filter, filter cake with 100ml of 75% acetic acid, transfer the filtrate to 3L glass reaction bottle, The filtrate was successively added with 1000 ml of dichloromethane and 1000 ml of water, and the mixture was stirred and the organic layer was temporarily stored. The aqueous layer was extracted with 500 ml of dichloromethane, and the organic layer was combined. The organic layer was washed with 1000 ml of water, and the organic layer was washed with 5% carbonic acid. The aqueous sodium hydrogen solution was adjusted to rhoEta=6.0~7.0 (about 600 ml), and the organic layer was washed with 500 ml of water, and the organic layer was separated. The organic layer was concentrated under reduced pressure at 30-40 C until no significant solvent was discharged, and 300 ml was added. Ethyl acetate was stirred and crystallized at 20-30 C for 1 hour, filtered, and the filter cake was rinsed with 300 ml of ethyl acetate. The filter cake was blast dried at 40-50 C for 8 hours to obtain a white solid 60.0 g. (product), yield 86.0%, HPLC: 99.0%.

As the paragraph descriping shows that 144690-92-6 is playing an increasingly important role.

Reference£º
Patent; Jiashi (Hunan) Pharmaceutical Technology Co., Ltd.; Dai Yongzhi; Liu Hu; Zhu Laifa; Cai Jian; (8 pag.)CN108341804; (2018); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 236.0 g (50.3 mmol) ethyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-{4-[2-(trityltetrazol-5-yl)-phenyl]phenyl}-methyl imidazole-5-carboxylate (Va) and 3.0 g (75.4 mmol) of NaOH were suspended in 413 ml dimethylacetamide. The suspension was then stirred at room temperature for 20 h and after that 6.9 g (50.3 mmol) of K2CO3, were added. The mixture was cooled to 0 C. and solution of 15.4 g (70.4 mmol) 4-chloromethyl-5-methyl-2-oxo-1,3-dioxolene in 39 ml of dimethylacetamide were slowly added. The mixture was slowly heated to 50 C. and stirred at this temperature for 2 h. After esterification was completed, the mixture was cooled to 10 C. and poured into a mixture of 625 ml of ethyl acetate and 625 ml of 10% NaCl, and stirred at 25 C. for 15 min. The phases were separated and organic phase was washed 2¡Á with 500 ml of 10% NaCl, dried over Na2SO4 and filtered. The filtrate was concentrated up to ? (approximately 270 g) at reduced pressure.To the resulting solution, 80 ml of ethanol and 8.3 ml (100 mmol) of conc. HCl were added and stirred at 24-26 C. for 3 h. To the cooled mixture 600 ml of water was added and pH of the suspension was estimated to 5 by addition of 5 M NaOH. The phases were stirred for 15 min and separated. Water phase was reextracted with 150 ml of ethyl acetate. Collected organic phases were dried over Na2SO4, filtered and concentrated under reduced pressure. 560 ml of ethyl acetate were added and the mixture was evaporated again. After that, 300 ml of ethyl acetate were added and the mixture was cooled to 20 C. and stirred for 1 h, filtered off and washed with 20 ml of fresh ethyl acetate. The yield of the product (I) was 21 g (75%).

The synthetic route of 80841-78-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; KRKA; US2009/131680; (2009); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37830-90-3,4,5-Dimethyl-1,3-dioxol-2-one,as a common compound, the synthetic route is as follows.

(1) 2.08 g of 4,5-dimethyl-1,3-dioxol-2-one was dissolved in 24 mL of benzene, to which 3.25 g of N-bromosuccinimide and 86 mg of 2,2′-azobis(isobutyronitrile) were added at room temperature, and this mixture was stirred for 30 minutes while heating it under reflux. The reaction mixture was cooled to room temperature, and consequently, a solution of 4-bromomethyl-5-methyl-1,3-dioxol-2-one in benzene was obtained.(2) 3.00 g of methyl 3-(5-[4-(cyclopentyloxy)-2-hydroxybenzoyl]-2-{[3-(methoxymethoxy)-1,2-benzisoxazol-6-yl]methoxy}phenyl) propanoate was dissolved in 15 mL of methanol and 15 mL of tetrahydrofuran, to which a solution of 1.08 g of potassium hydroxide in 4.5 mL of water was added, and this mixture was stirred for one hour at room temperature, and then the solvent was distilled out under reduced pressure. The resultant residue was dissolved in 40 mL of N,N-dimethylformamide, to which 3.60 g of potassium carbonate was added. Then, the benzene solution prepared in (1) was added thereto, and was stirred for one hour at room temperature. The reaction mixture was poured into a mixture of ethyl acetate and water, and adjusted to pH 7 with 6M hydrochloric acid, and then the organic phase was separated therefrom. After the resultant organic phase was washed with water and a saturated sodium chloride solution successively, the washed phase was dried over anhydrous sodium sulfate, and the solvent was distilled out under reduced pressure. The resultant residue was purified by silica gel column chromatography [eluent; toluene:ethyl acetate=5:1] to yield 1.58 g of (5-methyl-2-oxo-1,3-dioxol-4-yl)methyl 3-(5-[4-(cyclopentyloxy)-2-hydroxybenzoyl]-2-{[3-(methoxymethoxy)-1,2-benzisoxazol-6-yl]methoxy}phenyl) propanoate as yellow oil. NMR(400MHz,CDCl3) delta value: 1.5-2.0(8H,m), 2.16(3H,s), 2.75(2H,t,J=7.6Hz), 3.10(2H,t,J=7.6Hz), 3.65(3H,s), 4.5-5.0(3H,m), 5.33(2H,s), 5.57(2H,s), 6.37(1H,dd,J=8.8,2.4Hz), 6.47(1H,d,J=2.4Hz), 6.95(1H,d,J=8.4Hz), 7.35(1H,dd,J=8.4,1.2Hz), 7.4-7.6(4H,m), 7.72(1H,d,J=8.0Hz), 12.67(1H,s).

As the paragraph descriping shows that 37830-90-3 is playing an increasingly important role.

Reference£º
Patent; TOYAMA CHEMICAL CO., LTD.; Hirono, Shuichi; Shiozawa, Shunichi; EP1445249; (2004); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 3; Preparation of olmesartan medoxomilTo dimethyl acetamide (800 ml) was added 4-(1-hydroxy-1-methylethyl)-2-propyl imidazol- 5-carboxylic acid ethyl ester (100 gms) and powdered potassium carbonate (200 gms). To this was charged 4-[2-(trityltetrazol-5-yl)phenyl]benzyl bromide (300 gms) at 45-50C. The contents were stirred for 8-10 hours at 45-50C. The insolubles were filtered. The contents were cooled to 5-100C. Potassium tertiary butoxide (100 gms) was charged at a temperature below 45C. The reaction was maintained at 40-450C for 3 hrs. To this was slowly added 5-methyl-2-oxo-1 ,3-dioxane-4-yl) methyl chloride at 40-450C over a period of 1 hour. The contents were heated to 60-650C and maintained for 4 hours. The reaction mass was then cooled to 30-350C and was neutralized with concentrated hydrochloride acid. The reaction mass was filtered to remove inorganics. The reaction mass was charcoalized using charcoal (10 gms) and was stirred for 30 minutes at 40-450C. The reaction mass was filtered over hyflo. The clear filtrate was acidified with hydrochloric acid (100 ml) slowly at 25-30C. The contents were stirred at 60C for 1 hour. The reaction mass was chilled to 0-5C and was filtered to remove tritanol. The reaction mass was concentrated under reduced pressure. The residue was quenched with water (500 ml), neutralized with base and extracted in dichloromethane (500 ml).The clear dichloromethane extract was then concentrated under reduced pressure, stripped off with acetone. The residue thus obtained was isolated from the acetone (250 ml) to give 55 gms of the title compound. Chromatogrphic purity- > 99%

80841-78-7 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one 9855518, aDioxole compound, is more and more widely used in various.

Reference£º
Patent; CIPLA LIMITED; CURTIS, Philip, Anthony; WO2008/43996; (2008); A2;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.144690-92-6,Triphenyl methyl olmesartan,as a common compound, the synthetic route is as follows.

A mixture of trityl olmesartan medoxomil in acetic acid and water (1:1, 400 mL) and sulfuric acid (12.2 gm) (1 mol equivalent) was stirred at 25C-30C for 45-60 minutes. Triphenylcarbinol was filtered and the filtrate was washed with acetic acid and water mixture (1:1, 50 rnL). Sodium carbonate solution (25% w/v, 100 mL) was charged to the filtrate and the product was extracted with dichloromethane (500 mL) followed by recovery of the solvent. The product was isolated, recrystallized using acetonitrile (300 mL), filtered, washed and dried under reduced pressure to obtain crude olmesartan medoxomil.Yield: 90% HPLC purity: 99.29 % OLM-acid: Not Detectable OLM- Eliminate: 0.07% Acetic acid content: Not Detectable

The synthetic route of 144690-92-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; RANBAXY LABORATORIES LIMITED; KAPOOR, Ashwini, Kumar; MEHTA, Hiten, Sharadchandra; NATH, Asok; PRASAD, Mohan; WO2010/134052; (2010); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.144690-92-6,Triphenyl methyl olmesartan,as a common compound, the synthetic route is as follows.

Example 4; Olmesartan medoxomil (V); The starting substance (III; 10 g) was dissolved in acetone (50 ml), and, after adding water (25 g), the mixture was heated to a mild boil for 14 h. After evaporating acetone and adding ethyl acetate (50 ml), water was separated, and the organic layer was again washed with water (10 ml). The extract was concentrated and evaporated with toluene (50 ml) once more, the residue was dissolved in ethyl acetate (20 ml) and toluene (20 ml). The mixture was concentrated to 25 ml and allowed to crystallize under stirring for 30 min; after cooling to 15 C, the insoluble portion was sucked off and washed with ethyl acetate. 6.5 g of the product was obtained, which, after recrystallization from ethanol, gave 6 g (86 %) of the product with an HPLC purity of 98.7 %.By further recrystallization from ethyl acetate and cyclohexane, 5.1 g of a sample with an HPLC purity of 99.6 % was obtained. 1H NMR (250 MHz, CDCl3) delta: 0.82 (3H, t, J = 7.5 Hz); 1.50 (6H, s); 1.54-1.63 (2H, m); 2.07 (3H, s); 2.48 (2H, t, J = 7.5 Hz); 4.86 (2H, s); 5.32 (2H, s); 6.70 (2H, d, J = 8 Hz); 6.99 (2H, d, J = 8 Hz); 7.3-7.5 (3H, m); 7.72 (IH, dd, J = 1.7 Hz).

144690-92-6 Triphenyl methyl olmesartan 19036162, aDioxole compound, is more and more widely used in various.

Reference£º
Patent; ZENTIVA, A.S.; WO2007/48361; (2007); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.144690-92-6,Triphenyl methyl olmesartan,as a common compound, the synthetic route is as follows.

Example 8; Olmesartan medoxomil (V); Water (10 g) was added to a solution of the starting substance (III; 20 g) in acetone (50 ml), and the mixture was heated to a mild boil for 14 h. After the reaction was completed, the mixture was cooled to 0 0C, and the formed trityl alcohol was sucked off. After concentration, a crude product was obtained, which was extracted with ethyl acetate (70 ml). After evaporating the extract and crystallizing from acetone, 10.6 g (76 %) of the product with an HPLC purity of 97.0 % was obtained. Recrystallization from ethyl methyl ketone gave 10.2 g (73 %) of the product with an HPLC purity of 99.3 %; m.p. 175-177 C.

As the paragraph descriping shows that 144690-92-6 is playing an increasingly important role.

Reference£º
Patent; ZENTIVA, A.S.; WO2007/48361; (2007); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

188.0kg of tetrahydrofuran was added to a glass-lined reactor, 54.0kg 4- (1- hydroxy-1-methylethyl) -2-propyl-1- {4- [2- (trityl-tetrazol -5 – yl) phenyl] phenyl} methylimidazole-5-carboxylate, 92.0.0kg 4.0kg purified water and lithium hydroxide monohydrate.After complete addition, 20 stirred for 18 hours, once every 2 hours the reaction temperature recording, tracking and detection TLC starting material to substantially complete the reaction.After completion of the reaction, 240.0kg Ethyl acetate and sodium chloride solution (20.0 kg of sodium chloride was added to 180.0kg purified water, and dissolved with stirring), stirred for 10 minutes, allowed to stand for 20 minutes stratification.The organic phase was washed with sodium chloride solution (32.0 kg of sodium chloride was added to 288.0kg purified water, stirred and dissolved) Average washed twice, each wash was stirred for 10 minutes and allowed to stand for 20 minutes.The organic phase was collected, dried over anhydrous sodium sulfate and stirred for 4 hours.Filtered, and the filtrate was concentrated under reduced pressure to remove ethyl acetate (water bath temperature controlled at 45 ¡À 5 , the degree of vacuum at -0.1 ~ -0.06MPa), a solution 188.0kg N, N- dimethylformamide, is added 15.3kg anhydrous potassium carbonate, 2.7kg of potassium iodide was stirred at 20 ¡À 10 was slowly added 14.5kg 4- chloro-5-methyl-1,3-dioxol-2-one, addition was completed, heating, feed temperature control reaction was stirred for 2 hours at 40 ¡À 2 .After completion of the reaction, the material was cooled to 15 ¡À 5 rejection filter, and the filtrate was added to a solution of sodium chloride (338.0kg sodium chloride to 940.0kg purified water, and dissolved with stirring), the following -5 ~ 0 stirred for 4h, rejection was filtered, the filter cake was charged to an oven baking pan blast drying oven at a temperature of 40 ¡À 5 8 hours.To give 58.2kg of trityl olmesartan medoxomil, a yield of 96.5%.

The synthetic route of 80841-78-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Lianyungang Runzhong Pharmaceutical Co., Ltd.; Zhong Zhaobo; Cheng Jinrong; He Shaojie; Tang Zhaocheng; (6 pag.)CN110396084; (2019); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.80841-78-7,4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one,as a common compound, the synthetic route is as follows.

Example 5: The reaction part was charged with ethyl 4- (1-hydroxy-1-methylethyl) -2-propyl-1- {4- [2- (trityltetrazol-5-yl) phenyl] 22 g of 5-carboxylate (Formula 4), 3.1 g of sodium hydroxide and 90 mL of ethanol were added and the mixture was stirred at 20 to 25 C for 4 to 5 hours. When the reaction was completed, the reaction solution was concentrated. To the residue were added 50 mL of ethyl acetate and 50 mL of purified water. The mixture was stirred for 1 hour and then layered. The separated organic layer was washed twice with an aqueous solution containing 30 g of salt and 170 mL of purified water. 1 g of activated carbon and 20 g of anhydrous sodium sulfate were added to the organic layer, followed by stirring for 30 minutes to 1 hour, followed by filtration Respectively. After the filtrate was concentrated under reduced pressure, 50 mL of N, N-dimethylacetamide was added to the residue, the temperature was adjusted to 5 to 10 DEG C 4 g of potassium carbonate was added and 6.2 g of 4- (chloromethyl) -5-methyl-1,3-dioxol-2-one (Formula 6) was dissolved in N, N-dimethylacetamide 6 ML was added dropwise, and the mixture was reacted at 45 to 50 C for 4 hours with stirring. When the reaction is completed, the reaction solution is cooled to 20 to 25 After cooling, 220 mL of ethyl acetate, 30 g of salt and 170 mL of purified water were added successively. The organic layer was separated And then washed once more with an aqueous solution containing 30 g of salt and 170 mL of purified water. The organic layer was washed with 1 g of activated carbon, 20 g of sodium was added and stirred for 30 minutes to 1 hour, followed by filtration. The filtrate was concentrated under reduced pressure, and then acetone 100 mL of i-tril was added, and the mixture was stirred at 50 to 55 C for 1 hour. The crystals were cooled to 0 to 5 [deg.] C and stirred for 2 hours. Followed by washing with 50 mL of isopropyl alcohol, followed by drying to obtain 21.6 g (yield: 88%) of tritylolemecanemethoxysilane (formula 1a) Purity 99.97%) was obtained

80841-78-7 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one 9855518, aDioxole compound, is more and more widely used in various.

Reference£º
Patent; DONGBANG FTL CO., LTD; Song, Tae Hong; Jung, Hun Suk; Jang, Do Yeon; Moon, Chung Sun; Jung, Hee Jung; (18 pag.)KR101526249; (2015); B1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem