Dioxole related

In heterogeneous catalysis, the catalyst is in a different phase from the reactants. 80841-78-7, At least one of the reactants interacts with the solid surface in a physical process called adsorption in such a way. 80841-78-7, name is C5H5ClO3. In an article£¬Which mentioned a new discovery about 80841-78-7

Example 236.0 g (50.3 mmol) ethyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-{4-[2-(trityltetrazol-5-yl)-phenyl]phenyl}-methyl imidazole-5-carboxylate (Va) and 3.0 g (75.4 mmol) of NaOH were suspended in 413 ml dimethylacetamide. The suspension was then stirred at room temperature for 20 h and after that 6.9 g (50.3 mmol) of K2CO3, were added. The mixture was cooled to 0 C. and solution of 15.4 g (70.4 mmol) 4-chloromethyl-5-methyl-2-oxo-1,3-dioxolene in 39 ml of dimethylacetamide were slowly added. The mixture was slowly heated to 50 C. and stirred at this temperature for 2 h. After esterification was completed, the mixture was cooled to 10 C. and poured into a mixture of 625 ml of ethyl acetate and 625 ml of 10% NaCl, and stirred at 25 C. for 15 min. The phases were separated and organic phase was washed 2¡Á with 500 ml of 10% NaCl, dried over Na2SO4 and filtered. The filtrate was concentrated up to ? (approximately 270 g) at reduced pressure.To the resulting solution, 80 ml of ethanol and 8.3 ml (100 mmol) of conc. HCl were added and stirred at 24-26 C. for 3 h. To the cooled mixture 600 ml of water was added and pH of the suspension was estimated to 5 by addition of 5 M NaOH. The phases were stirred for 15 min and separated. Water phase was reextracted with 150 ml of ethyl acetate. Collected organic phases were dried over Na2SO4, filtered and concentrated under reduced pressure. 560 ml of ethyl acetate were added and the mixture was evaporated again. After that, 300 ml of ethyl acetate were added and the mixture was cooled to 20 C. and stirred for 1 h, filtered off and washed with 20 ml of fresh ethyl acetate. The yield of the product (I) was 21 g (75%).

Note that a catalyst decreases the activation energy for both the forward and the reverse reactions and hence accelerates both the forward and the reverse reactions.80841-78-7, you can also check out more blogs about80841-78-7

Reference£º
Patent; KRKA; US2009/131680; (2009); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

In an article, published in an article,once mentioned the application of 144690-92-6,molecular formula is , is a conventional compound. this article was the specific content is as follows. 144690-92-6

10L reaction flask was charged 500.0g (0.62mol) compound 6,3L water, 1L of acetone, was added dropwise a solution of 645.0g of 22.5% sulfuric acid at 20 . Dropping was completed, the reaction at room temperature after 4.5h TLC or HPLC in control, raw reaction was complete. Body cooling system to 0-5 , when the temperature stabilized filtrate back into the reaction vessel was charged with acetone 1L and 2L water. The system was maintained at 15 solution of 210g of potassium carbonate and 400g water to form a solution, drops of completion, stirring after 1-2h incubation filtration. The filter cake was dried to obtain olmesartan medoxomil pure 328.9g. HPLC: 99.96%, yield: 94.3%, 144690-92-6

Do you like my blog? If you like, you can also browse other articles about this kind. Thanks for taking the time to read the blog about 144690-92-6

Reference£º
Patent; Jiangsu Bang Pharmaceutical Co., Ltd.; Zhao, Guangrong; Huan, Shuang; Zhao, Huayang; Liu, Liping; Chen, Guoping; Tang, Jingyu; (19 pag.)CN105481842; (2016); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

144690-92-6,is a common compound. C48H44N6O6In an article, once mentioned the new application about 144690-92-6.

Example 5; Olmesartan medoxomil (V); Water (10 g) was added to a solution of the starting substance (III; 20 g) in acetonitrile (50 ml), and the mixture was heated to a mild boil for 14 h. Acetonitrile was evaporated, and, after dissolving in acetone (150 ml), the mixture was filtered through alumina and concentrated. After crystallization from the mixture tetrahydrofuran / ethyl acetate H g (78 %) of the product with an HPLC purity of 97.0 % was obtained. Recrystallization from methanol and water gave 1O g of the product with an HPLC purity of 99.3 %; m.p. 175- 177 0C.; Example 6; Olmesartan medoxomil (V); Water (10 g) was added to a solution of the starting substance (III; 10 g) in acetonitrile (50 ml), and the mixture was heated to a mild boil for 14 h. Acetonitrile was evaporated, and, after dissolving in acetone (150 ml), the mixture was filtered through silica gel and concentrated. After crystallization from acetonitrile, 4 g (57 %) of the product was obtained. After recrystallization from the mixture methyl tert-butyl ether / ethyl acetate, 3.4 g of the product with an HPLC purity of 99.4 % was obtained; m.p. 175-177 C.

Note that a catalyst decreases the activation energy for both the forward and the reverse reactions and hence accelerates both the forward and the reverse reactions.144690-92-6, you can also check out more blogs about144690-92-6

Reference£º
Patent; ZENTIVA, A.S.; WO2007/48361; (2007); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

144690-92-6,Children learn through play, and they learn more than adults might expect. Science experiments are a great way to spark their curiosity, get their minds active, and encourage them to do something that doesn¡¯t involve a screen. C48H44N6O6,introducing its new discovery.

A solution of MTT in an organic solvent and water (20%) was heated for 4-8 hrs at reflux. When the solvents were either acetonitrile (ACN), isopropyl alcohol (IPA) or t-butanol (t-BuOH), 1 volume of water was added, and the reaction was stirred until the amount of MTT was less than 2%. The mixture was evaporated to dryness. Ethyl acetate (EtOAc, 1 volume) was added to the residue and then evaporated again (twice). The resulting solid was dissolved in EtOAc (12 vol) and heated to reflux. The solution was cooled (2 C.) and stirred for 2 hrs. The product was filtered, washed (EtOAc, 1 vol), and dried on vacuum (45 C.). Table 1 shows the process details with different organic solvents: TABLE 1 Total solvent Time Solvent(s) Volume Temperature ( C.) (hrs) pH ACN:H2O 5:1 + 1 85 7 4.89-4.3 IPA:H2O 5:1 + 1 85 7 4.62-4.25t-BuOH:H2O 5:1 + 1 85 7 4.78-4.28n-propanol:H2O 5:1 reflux 2.5 4.3n-BuOH:H2O 5:1 110 2.5 4.412-BuOH:H2O 5:1 100 3 4.5iso-penthanol:H2O 5:1 100 3 5DMA:H2O 5:1 100 4 4.5DMF:H2O 5:1 100 4 4.5

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 144690-92-6 is helpful to your research. 144690-92-6

Reference£º
Patent; Hedvati, Lilach; Pilarsky, Gideon; Shenkar-Garcia, Natalia; US2006/148870; (2006); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7,Chemistry can be defined as the study of matter and the changes it undergoes. You¡¯ll sometimes hear it called the central science because it is the connection between physics and all the other sciences, starting with biology.4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one,introducing its new discovery.

Step B, go to the reaction solution of compound (II) obtained in Step A with stirring,Add 6.27kg of anhydrous sodium carbonate powder and 2.01kg of iodine, replace the air with nitrogen,The nitrogen pressure in the kettle is ?0.01Mpa, the control temperature is 50 ¡À 2 ,15.05 kg of compound (IV) was added dropwise at a constant pressure, and the addition was completed within 40 to 60 minutes.After the reaction was held for 1 hour, the reaction mixture was reduced to below 10 C.Extract with conventional solvents in an extraction kettle, wash with water, and separate the layers.The organic phase was distilled under reduced pressure to recover the solvent, crystallized, centrifuged,After drying, 54.88 kg of the crude compound (I) was obtained.Step C: Add 192.08 kg of ethyl acetate to the 500L refining kettle, start stirring,Add 54.88 kg of crude compound (I) obtained in step B, close the feed port,Keep the pressure ?0.01MPa after replacing air with nitrogen,The temperature was raised to 75 C and dissolved for 25 minutes until it was clear. The filtrate was filtered and the temperature was reduced to 2.5 C.Centrifuge, put the filter cake into the double cone dryer,Under reduced pressure, a small flow of nitrogen was passed in for replacement three times, and the drying temperature was controlled to 40-50 C.Vacuum degree ?-0.09MPa, after drying for 1 hour,Increase the drying temperature to 50 60 and continue drying for 3 hours.After cooling down, 53.60 kg of compound (1) was obtained, and the HPLC content was 99.87%.Compound (III) had a residual content of 0.06%.

Interested yet? Keep reading other articles of 80841-78-7!, 80841-78-7

Reference£º
Patent; Shandong Xinhua Pharmaceutical Co., Ltd.; Zhu Lianbo; Wu Hui; Dou Guohua; (6 pag.)CN110590758; (2019); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

In heterogeneous catalysis, the catalyst is in a different phase from the reactants. 37830-90-3, At least one of the reactants interacts with the solid surface in a physical process called adsorption in such a way. 37830-90-3, name is C5H6O3. In an article£¬Which mentioned a new discovery about 37830-90-3

(1) 2.08 g of 4,5-dimethyl-1,3-dioxol-2-one was dissolved in 24 mL of benzene, to which 3.25 g of N-bromosuccinimide and 86 mg of 2,2′-azobis(isobutyronitrile) were added at room temperature, and this mixture was stirred for 30 minutes while heating it under reflux. The reaction mixture was cooled to room temperature, and consequently, a solution of 4-bromomethyl-5-methyl-1,3-dioxol-2-one in benzene was obtained.(2) 3.00 g of methyl 3-(5-[4-(cyclopentyloxy)-2-hydroxybenzoyl]-2-{[3-(methoxymethoxy)-1,2-benzisoxazol-6-yl]methoxy}phenyl) propanoate was dissolved in 15 mL of methanol and 15 mL of tetrahydrofuran, to which a solution of 1.08 g of potassium hydroxide in 4.5 mL of water was added, and this mixture was stirred for one hour at room temperature, and then the solvent was distilled out under reduced pressure. The resultant residue was dissolved in 40 mL of N,N-dimethylformamide, to which 3.60 g of potassium carbonate was added. Then, the benzene solution prepared in (1) was added thereto, and was stirred for one hour at room temperature. The reaction mixture was poured into a mixture of ethyl acetate and water, and adjusted to pH 7 with 6M hydrochloric acid, and then the organic phase was separated therefrom. After the resultant organic phase was washed with water and a saturated sodium chloride solution successively, the washed phase was dried over anhydrous sodium sulfate, and the solvent was distilled out under reduced pressure. The resultant residue was purified by silica gel column chromatography [eluent; toluene:ethyl acetate=5:1] to yield 1.58 g of (5-methyl-2-oxo-1,3-dioxol-4-yl)methyl 3-(5-[4-(cyclopentyloxy)-2-hydroxybenzoyl]-2-{[3-(methoxymethoxy)-1,2-benzisoxazol-6-yl]methoxy}phenyl) propanoate as yellow oil. NMR(400MHz,CDCl3) delta value: 1.5-2.0(8H,m), 2.16(3H,s), 2.75(2H,t,J=7.6Hz), 3.10(2H,t,J=7.6Hz), 3.65(3H,s), 4.5-5.0(3H,m), 5.33(2H,s), 5.57(2H,s), 6.37(1H,dd,J=8.8,2.4Hz), 6.47(1H,d,J=2.4Hz), 6.95(1H,d,J=8.4Hz), 7.35(1H,dd,J=8.4,1.2Hz), 7.4-7.6(4H,m), 7.72(1H,d,J=8.0Hz), 12.67(1H,s).

Do you like my blog? If you like, you can also browse other articles about this kind. Thanks for taking the time to read the blog about 37830-90-3

Reference£º
Patent; TOYAMA CHEMICAL CO., LTD.; Hirono, Shuichi; Shiozawa, Shunichi; EP1445249; (2004); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

In heterogeneous catalysis, the catalyst is in a different phase from the reactants. 37830-90-3, At least one of the reactants interacts with the solid surface in a physical process called adsorption in such a way. 37830-90-3, name is C5H6O3. In an article£¬Which mentioned a new discovery about 37830-90-3

REFERENCE EXAMPLE 2 Preparation of 4-chloromethyl-5-methyl-1,3-dioxolene-2-one (II) To a solution of 75 g of 4,5-dimethyl-1,3-dioxolene-2-one (IV) in 750 ml of methylene chloride was added 97.6 g of sulfuryl chloride dropwise at 40¡ã-42¡ã C. over 2 hours. The mixture was stirred for 40 minutes at the same temperature and evaporated in vacuo to remove the solvent. NMR spectrometry of the resulting oil revealed that the product was 4-chloro-4-methyl-5-methylene-1,3-dioxolane-2-one (III) containing a trace amount of unreacted 4,5-dimethyl-1,3-dioxolene-2-one (IV). This oil was heated at 90¡ã C. with stirring for 2 hours without isolating 4-chloro-4-methyl-5-methylene-1,3-dioxolane-2-one (III) and then distilled in vacuo. 75.4 g (corresponding to an overall yield from 4,5-dimethyl-1,3-dioxolene-2-one (IV) of 77percent) of 4-chloromethyl-5-methyl-1,3-dioxolene-2-one (II) having the physicochemical properties described in Reference Example 1 was obtained.

Interested yet? Keep reading other articles of 37830-90-3!, 37830-90-3

Reference£º
Patent; Kanebo, Ltd.; US4554358; (1985); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

In heterogeneous catalysis, the catalyst is in a different phase from the reactants. 144690-92-6, At least one of the reactants interacts with the solid surface in a physical process called adsorption in such a way. 144690-92-6, name is C48H44N6O6. In an article£¬Which mentioned a new discovery about 144690-92-6

Example 236.0 g (50.3 mmol) ethyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-{4-[2-(trityltetrazol-5-yl)-phenyl]phenyl}-methyl imidazole-5-carboxylate (Va) and 3.0 g (75.4 mmol) of NaOH were suspended in 413 ml dimethylacetamide. The suspension was then stirred at room temperature for 20 h and after that 6.9 g (50.3 mmol) of K2CO3, were added. The mixture was cooled to 0 C. and solution of 15.4 g (70.4 mmol) 4-chloromethyl-5-methyl-2-oxo-1,3-dioxolene in 39 ml of dimethylacetamide were slowly added. The mixture was slowly heated to 50 C. and stirred at this temperature for 2 h. After esterification was completed, the mixture was cooled to 10 C. and poured into a mixture of 625 ml of ethyl acetate and 625 ml of 10% NaCl, and stirred at 25 C. for 15 min. The phases were separated and organic phase was washed 2¡Á with 500 ml of 10% NaCl, dried over Na2SO4 and filtered. The filtrate was concentrated up to ? (approximately 270 g) at reduced pressure.To the resulting solution, 80 ml of ethanol and 8.3 ml (100 mmol) of conc. HCl were added and stirred at 24-26 C. for 3 h. To the cooled mixture 600 ml of water was added and pH of the suspension was estimated to 5 by addition of 5 M NaOH. The phases were stirred for 15 min and separated. Water phase was reextracted with 150 ml of ethyl acetate. Collected organic phases were dried over Na2SO4, filtered and concentrated under reduced pressure. 560 ml of ethyl acetate were added and the mixture was evaporated again. After that, 300 ml of ethyl acetate were added and the mixture was cooled to 20 C. and stirred for 1 h, filtered off and washed with 20 ml of fresh ethyl acetate. The yield of the product (I) was 21 g (75%).

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 144690-92-6 is helpful to your research. 144690-92-6

Reference£º
Patent; KRKA; US2009/131680; (2009); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

37830-90-3,Let¡¯s face it, organic chemistry can seem difficult to learn. Especially from a beginner¡¯s point of view. Like C5H6O3,introducing its new discovery.

(1) 4-Bromomethyl-5-methyl-1,3-dioxolen-2-one [compound of formula (III) in which R is methyl and X is bromine] 3.42 g of 4,5-dimethyl-1,3-dioxolen-2-one [compound of formula (III’) in which R is methyl, prepared in accordance with the procedure described in Tetrahedron Letters, pages 1701-1704, (1972)] was dissolved in 150 ml of carbon tetrachloride. To the solution were added 5.34 g of N-bromosuccinimide and a catalytic amount of alpha,alpha’-azobisisobutyronitrile. The mixture was heated under reflux for 15 minutes. The reaction mixture was cooled with ice, and the insoluble materials were removed by filtration. The filtrate was concentrated under reduced pressure to give a syrupy residue. The residue was distilled under reduced pressure, and a fraction having a boiling point of 115¡ã to 120¡ã C./5 mmHg was recovered. Thus, 4.2 g (yield 73percent) of the captioned compound having the following properties was obtained as a colorless liquid. Elemental analysis for C5 H5 BrO3: IR (neat) nu(cm-1): near 18 25 (carbonyl). NMR (CCl4) delta(ppm): 2.10 (3H, –CH3, s), 4.10 (2H, –CH2 Br, s).

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 37830-90-3 is helpful to your research. 37830-90-3

Reference£º
Patent; Kanebo Ltd.; US4448769; (1984); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

144690-92-6,Let¡¯s face it, organic chemistry can seem difficult to learn. Especially from a beginner¡¯s point of view. Like C48H44N6O6,introducing its new discovery.

Example 5; Olmesartan medoxomil (V); Water (10 g) was added to a solution of the starting substance (III; 20 g) in acetonitrile (50 ml), and the mixture was heated to a mild boil for 14 h. Acetonitrile was evaporated, and, after dissolving in acetone (150 ml), the mixture was filtered through alumina and concentrated. After crystallization from the mixture tetrahydrofuran / ethyl acetate H g (78 %) of the product with an HPLC purity of 97.0 % was obtained. Recrystallization from methanol and water gave 1O g of the product with an HPLC purity of 99.3 %; m.p. 175- 177 0C.; Example 6; Olmesartan medoxomil (V); Water (10 g) was added to a solution of the starting substance (III; 10 g) in acetonitrile (50 ml), and the mixture was heated to a mild boil for 14 h. Acetonitrile was evaporated, and, after dissolving in acetone (150 ml), the mixture was filtered through silica gel and concentrated. After crystallization from acetonitrile, 4 g (57 %) of the product was obtained. After recrystallization from the mixture methyl tert-butyl ether / ethyl acetate, 3.4 g of the product with an HPLC purity of 99.4 % was obtained; m.p. 175-177 C.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 144690-92-6, help many people in the next few years.C48H44N6O6

Reference£º
Patent; ZENTIVA, A.S.; WO2007/48361; (2007); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem