Month: April 2022

Quality Control of 2-Bromomethyl-1,3-dioxolane. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 2-Bromomethyl-1,3-dioxolane, is researched, Molecular C4H7BrO2, CAS is 4360-63-8, about Iridium-catalyzed enantioselective allylic substitution with aqueous solutions of nucleophiles. Author is Sandmeier, Tobias; Goetzke, F. Wieland; Krautwald, Simon; Carreira, Erick M..

The iridium-catalyzed asym. allylic substitution under biphasic conditions is reported. This approach allows the use of various unstable and/or volatile nucleophiles including hydrazines, methylamine, t-Bu hydroperoxide, N-hydroxylamine, α-chloroacetaldehyde and glutaraldehyde. This transformation provides rapid access to a broad range of products from simple starting materials in good yields and up to >99% ee and 20:1 d.r. Addnl., these products can be elaborated efficiently into a diverse set of cyclic and acyclic compounds, bearing up to four stereocenters. The iridium-catalyzed asym. allylic substitution under biphasic conditions is reported. This approach allows the use of various unstable and/or volatile nucleophiles including hydrazines, methylamine, t-Bu hydroperoxide, N-hydroxylamine, α-chloroacetaldehyde and glutaraldehyde. This transformation provides rapid access to a broad range of products from simple starting materials in good yields and up to >99% ee and 20:1 d.r.. Addnl., these products can be elaborated efficiently into a diverse set of cyclic and acyclic compounds, bearing up to four stereocenters.

In some applications, this compound(4360-63-8)Quality Control of 2-Bromomethyl-1,3-dioxolane is unique.If you want to know more details about this compound, you can contact with the author or consult more relevant literature.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

Epoxy compounds usually have stronger nucleophilic ability, because the alkyl group on the oxygen atom makes the bond angle smaller, which makes the lone pair of electrons react more dissimilarly with the electron-deficient system. Compound: H-Trp-OMe.HCl, is researched, Molecular C12H15ClN2O2, CAS is 7524-52-9, about Organometallic AlaM reagents for umpolung peptide diversification.SDS of cas: 7524-52-9.

Selective modification of peptides and proteins is emerging as a promising strategy to develop novel mechanistic probes and prepare compounds with translational potential. While many methods to perform direct bioconjugation rely on reactions with dehydroalanine, an alternative strategy capitalizing on polarity reversal at the β carbon in amino acids can open access to a new type of diversification reactions characterized by absolute control of regio- and stereoselectivity. Here, we report that alanine carbastannatranes AlaSn can serve as a universal synthon in various C-C and C-heteroatom bond-forming reactions demonstrated in over 50 diverse examples. These reagents are compatible with peptide and protein manipulation techniques and undergo chemoselective conjugation in minutes when promoted by Pd(0). Despite their increased nucleophilicity and propensity to transfer the alkyl group, AlaSn operate at room temperature under buffered conditions (pH 6.5-8.5). We also show that AlaSn can be easily transformed into several canonical L- and D-amino acids in arylation, acylation, and etherification reactions. Furthermore, AlaSn can partake in macrocyclizations exemplified by the synthesis of medium size cyclic peptides with various topologies (7-13 membered macrocycles). Taken together, metalated alanine AlaSn demonstrate unparalleled scope and represent a new type of umpolung reagents suitable for structure-activity relationship studies and peptide diversification.

In some applications, this compound(7524-52-9)SDS of cas: 7524-52-9 is unique.If you want to know more details about this compound, you can contact with the author or consult more relevant literature.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

Application of 707-61-9. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: 4-Methyl-1-phenyl-2,3-dihydro-1H-phosphole 1-oxide, is researched, Molecular C11H13OP, CAS is 707-61-9, about Synthesis and application of aqueous polycarbodiimide crosslinking agent(I): aqueous cationic polycarbodiimide crosslinking agent. Author is Tong, Rong; Pang, Xiaoyan; Sun, Jing; Ding, Zhiwen; Jia, Jizhang.

Aqueous cationic polycarbodiimide crosslinking agent was synthesized with isophorone diisocyanate (IPDI), polypropylene glycol (PPG400), N,N-dimethylethanolamine (DMEA) and 3-methyl-1-phenyl-2-phosopholene-1-oxide (MPPO) as raw materials. The influences of synthesis conditions such as the dosage of catalyst, reaction time, reaction temperature, nitrogen jet velocity, hydrophilic end-blocking agent, end-blocking temperature and the dosage of end-blocking agent on the blocking reaction were investigated. The developed crosslinking agents were applied to protein finishing agent. And it is found that the properties of obtained finishing film agent are better in the water resistance, alkali resistance, solvent resistance and flexibility. Also, the tensile strength of film increases with a little decrease in brightness and transparency.

When you point to this article, it is believed that you are also very interested in this compound(707-61-9)Application of 707-61-9 and due to space limitations, I can only present the most important information.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

SDS of cas: 305798-02-1. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 2-Bromo-6-(bromomethyl)naphthalene, is researched, Molecular C11H8Br2, CAS is 305798-02-1, about Regioselective control by a catalyst switch in palladium-catalyzed benzylallylation of arylethylidene malononitriles. Author is Zhang, Xuan; Yu, Xiaoqiang; Feng, Xiujuan; Liu, Hesong; He, Ren; Yamamoto, Yoshinori; Bao, Ming.

Regioselective control by a catalyst switch in palladium-catalyzed benzylallylation of arylethylidene malononitriles (α-benzyl-β-allylation vs. α-allyl-β-benzylation) is described. The three-component reaction of 2-(bromomethyl)naphthalenes, arylethylidene malononitriles, and allyltributylstannane proceeds smoothly with palladium nanoparticles as a catalyst to provide α-benzyl-β-allylation products in good yields. The regioselectivity of the benzylallylation reaction is completely overturned with Pd(PPh3)4 as the catalyst instead of palladium nanoparticles to obtain α-allyl-β-benzylation products in moderate to good yields.

When you point to this article, it is believed that you are also very interested in this compound(305798-02-1)SDS of cas: 305798-02-1 and due to space limitations, I can only present the most important information.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

HPLC of Formula: 707-61-9. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: 4-Methyl-1-phenyl-2,3-dihydro-1H-phosphole 1-oxide, is researched, Molecular C11H13OP, CAS is 707-61-9, about MALDI-TOF/TOF CID Study of Polycarbodiimide Branching Reactions. Author is Gies, Anthony P.; Heath, William H.; Keaton, Richard J.; Jimenez, Jorge J.; Zupancic, Joseph J..

A combination of MALDI-TOF MS and TOF/TOF collision-induced dissociation (CID) experiments was conducted on toluene diisocyanate (TDI) based carbodiimide and Ph isocyanate (PI) carbodiimide mixtures to examine their degradation mechanisms and identify “”fingerprint”” side products associated with each of their synthesis. Findings include the first observance of the 3-methyl-1-phenyl-2-phospholene-1-oxide (MPPO)/carbodiimide (CDI) catalyst-attached intermediate and the use of CID fragmentation to verify its chem. structure and degradation processes. This work is significant for two reasons: (1) it identifies extensive branching as the root-cause of viscosity build-up in carbodiimides and (2) it presents a BF3-initiated mechanism leading to polyguanidine formation.

When you point to this article, it is believed that you are also very interested in this compound(707-61-9)HPLC of Formula: 707-61-9 and due to space limitations, I can only present the most important information.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Knight, Brian J.; Tolchin, Zachary A.; Smith, Joel M. researched the compound: Methyl 5-fluoro-3-pyridinecarboxylate( cas:455-70-9 ).Related Products of 455-70-9.They published the article 《A predictive model for additions to N-alkyl pyridiniums》 about this compound( cas:455-70-9 ) in Chemical Communications (Cambridge, United Kingdom). Keywords: pyridine Grignard methyl triflate regioselective dearomative addition; dihydropyridine preparation. We’ll tell you more about this compound (cas:455-70-9).

Disclosed in this communication is a thorough study on the dearomative addition of organomagnesium nucleophiles to N-alkyl pyridinium electrophiles. The regiochem. outcomes have observable and predictable trends associated with the substituent patterns on the pyridinium electrophile. Often, the substituent effects can be either additive, giving high selectivities, or ablative, giving competing outcomes. Addnl., the nature of the organometallic nucleophilic component was also investigated for its role in the regioselective outcome. The effects of either reactive component are important to both the overall reactivity and site of nucleophilic addition The utility of these observed trends is demonstrated in a concise, dearomative synthesis of a tricyclic compound shown to have insecticidal activity.

When you point to this article, it is believed that you are also very interested in this compound(455-70-9)Related Products of 455-70-9 and due to space limitations, I can only present the most important information.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

Computed Properties of C4H7BrO2. The reaction of aromatic heterocyclic molecules with protons is called protonation. Aromatic heterocycles are more basic than benzene due to the participation of heteroatoms. Compound: 2-Bromomethyl-1,3-dioxolane, is researched, Molecular C4H7BrO2, CAS is 4360-63-8, about Iron-catalysed allylation-hydrogenation sequences as masked alkyl-alkyl cross-couplings. Author is Bernauer, Josef; Wu, Guojiao; Jacobi von Wangelin, Axel.

An iron-catalyzed allylation of organomagnesium reagents (alkyl, aryl) with simple allyl acetates proceeds under mild conditions (Fe(OAc)2 or Fe(acac)2, Et2O, r.t.) to furnish various alkene and styrene derivatives Mechanistic studies indicate the operation of a homotopic catalyst. The sequential combination of such iron-catalyzed allylation with an iron-catalyzed hydrogenation results in overall C(sp3)-C(sp3)-bond formation that constitutes an attractive alternative to challenging direct cross-coupling protocols with alkyl halides.

When you point to this article, it is believed that you are also very interested in this compound(4360-63-8)Computed Properties of C4H7BrO2 and due to space limitations, I can only present the most important information.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Biosynthesis of penicillins. VI. N-2-Hydroxyethyl amides of some polycyclic and heterocyclic acetic acids as precursors》. Authors are Jones, Reuben G.; Soper, Quentin F.; Behrens, Otto K.; Corse, Joseph W..The article about the compound:2-Bromo-6-(bromomethyl)naphthalenecas:305798-02-1,SMILESS:BrCC1=CC2=CC=C(Br)C=C2C=C1).Category: dioxole. Through the article, more information about this compound (cas:305798-02-1) is conveyed.

2,6-MeC10H6NH2 (78 g.) in 80 mL. concentrated HCl and 200 mL. H2O at 0°, treated at 5° with 35 g. NaNO2 in 50 mL. H2O and, after 0.5 h., with 130 g. ice-cold 42% HBF4, gives 90% of the 2-diazonium fluoroborate, decomposition of which yields 69% 2-methyl-6-fluoronaphthalene (I), m. 77°. I (40 g.) at 210°, treated (15 min.) with 40 g. Br (with illumination with a 100-w. lamp), gives 82% 2-(bromomethyl)-6-fluoronaphthalene (II), b2 125-30°, m. 53°. II (48 g.), added to a refluxing solution of 30 g. KCN in 60 mL. H2O and 200 mL. EtOH, the EtOH removed after refluxing 4 h., 500 mL. H2O added, the solution extracted with ether, and the residue from the ether boiled 5 h. with 40 g. KOH in 40 mL. H2O and 200 mL. EtOH, gives 74% 6-fluoro-2-naphthaleneacetic acid, m. 138-9° (Me ester, b2 163-6°, m. 48-9°). 2,6-MeC10H6NH2 (63 g.) in 100 mL. H2O and 700 g. 48% HBr, treated (3-4 h.) at 5° with 45 g. NaNO2 in 75 mL. H2O and the diazonium solution poured (10 min.) into 170 g. CuBr in 800 mL. 48% HBr at 70-80°, gives 40% 6-bromo-2-methylnaphthalene (III), m. 142° III yields 80% 6-bromo-2-(bromomethyl)naphthalene, m. 124-5° this gives 69% 6-bromo-2-naphthaleneacetic acid, m. 175-6° (Me ester, b2 187-93°, m. 67-9°). 3,2-ClC10H6CHO (32.5 g.), 35 g. hippuric acid, 14.5 g. anhydrous AcONa, and 50 mL. Ac2O, heated on the steam bath 1 h., give 75% 2-phenyl-4-(3-chloro-2-naphthylmethylene)-5(4H)-oxazolone (IV), bright yellow, m. 192° 40 g. IV in 200 mL. 10% NaOH, refluxed 9 h., the mixture diluted to 1500 mL. with H2O, washed with ether, the aqueous solution treated with 20 mL. 12.5 N NaOH and 15 mL. 30% H2O2, allowed to stand overnight, the filtrate acidified with HCl, extracted with ether-C6H6, and the residue esterified, gives 37% Me 3-chloro-2-naphthaleneacetate, b2 163-5°, m. 49-50° the free acid m. 193-4°. 6,2-MeOC10H6Ac (100 g.), 25.5 g. S, and 87 g. morpholine, heated 18 h. at 140°, part of the morpholine removed in vacuo, 250 mL. AcOH and 350 mL. concentrated HCl added, and the mixture refluxed 24 h., give 67% 6-methoxy-2-naphthaleneacetic acid, m. 203-5° (Me ester, b1 192-3°, m. 86°, 73%). 5,6,7,8-Tetrahydro-2-acetonaphthone (50 g.), 13 g. S, and 40 mL. morpholine, refluxed overnight, 400 mL. concentrated HCl and 300 mL. H2O added, and the mixture again refluxed overnight, followed by esterification with EtOH and H2SO4, give Et 5,6,7,8-tetrahydro-2-naphthaleneacetate, b0.5 140-3°. 2-Acetylphenanthrene (13.2 g.), 3.2 g. S, and 10.5 g. morpholine, heated 15 h. at 160°, the mixture treated with 150 mL. AcOH and 36% HCl, and refluxed 24 h., give 81% 2-phenanthreneacetic acid, m. 187-8° the 3-isomer m. 174-5°, 84% (Me ester, b1.5 203-5°, 89%). 8-(Bromomethyl)quinoline (120 g.) in 250 mL. warm EtOH, added (0.5 h.) to 50 g. KCN in 100 mL. warm H2O and the mixture refluxed 1.5 h., gives 78% 8-(cyanomethyl)quinoline, m. 86-7°; hydrolysis with aqueous alc. KOH and esterification give 91% Et 8-quinolineacetate, b3 158-60°. Et 3-quinolinecarboxylate (70 g.), 62 g. AcOEt, and EtONa (12 g. Na and 0.52 mol absolute EtOH) in 100 cc. dry C6H6, refluxed 20 h., the cooled solution poured onto ice, diluted to 5 l. with H2O, treated with 50 mL. 12 N NaOH, washed with two 300 mL. portions of ether, and the aqueous solution neutralized with dilute H2SO4 and extracted with two 500-mL. portions of ether, give 75% Et 3-quinolylformylacetate, m. 84° 27 g. of the keto ester in 125 g. 25% H2SO4, heated 30 min. at 100°, gives 95% 3-acetylquinoline (V). V (7 g.), 5 g. S, 50 mL. (NH4)2S, and 25 mL. H2O, heated 20 h. at 145-50°, the residue extracted with two 300-mL. portions boiling 5% HCl, the solution refluxed 3 h., and the crude acid esterified, give 19% Et 3-quinolineacetate, b2.5 140-2°. pH2NC6H4CH2CO2H (46 g.), 10.5 g. FeSO4, 115 g. C3H5(OH)3, 23 g. PhNO2, and 53 mL. concentrated H2SO4, boiled 5 h., give 37 g. crude acid which, esterified with EtOH and HCl, gives 39% Et 6-quinolineacetate, b3 160° the free acid (VI) m. 218-20°. Et 6-quinolinecarboxylate and AcOEt, condensed with EtONa, give 87% Et 6-quinolineacetate, hydrolysis of which with 25% H2SO4 at 100° gives 90% 6-acetylquinoline, m. 76° the Willgerodt reaction gives 87.5% VI. 3,4 O2N(H2N)C6H3CO2H (108 g.) in 350 mL. concentrated HCl, treated with 125 g. Sn in portions (temperature below 90°), gives 87% (3,4-diaminophenyl)acetic acid-2HCl (VII), m. 222-4° (decomposition); Et ester-2HCl (VIII), m. 185-7° (decomposition); 3 g. VII and 20 mL. 98-100% HCO2H, heated several hrs., give 100% 5-benzimidazoleacetic acid-HCl, m. 240-2° the Et ester m. 65-6°, 75%. VIII (14 g.) in 200 mL. ice H2O, treated with excess COCl2, gives 95% Et 2-hydroxy-5-benzimidazoleacetate, m. 208-9°. NCCH2CO2Et (113 g.) and 15 g. (HOCH2CH2)3N in 100 mL. absolute EtOH, treated with a slow stream of H2S, the mixture poured after 5 days into ice-H2O, and 38 g. of the resulting oil and 23.1 g. ClCH2Ac in 300 cc. anhydrous ether kept 4 days, give 20.6 g. Et 4-methyl-2-thiazoleacetate, b17 136-9°. Thiaxanthydrol (42 g.), 30 g. CH2(CO2H)2, and 80 mL. C5H5N, heated 2 h. at 60-70° and 2 h. at 90-5° and the liquid poured into 600 mL. 2 N HCl, give 90% 9-thiaxantheneacetic acid, m. 167-8° (Me ester, b2 182-4°). The Ag salt of 2-benzylimidazole (53 g.) and 50 g. BrCH2CO2Et in 200 mL. xylene, refluxed 48 h., give 25.4% of the Et ester, m. 70-70.5°, of 2-benzyl-1-imidazoleacetic acid, m. 173-4°. Me 1-acenaphtheneacetate, b4 176-8°. N-2-Thienylacetyl-DL-valine m. 110-12°. Amides were prepared by heating the Me or Et ester of the various acids with a slight excess of HOCH2CH2NH2 at 100-150° for several hrs.; R in RCH2CONHCH2CH2OH is given, together with S (see part V). 2-C10H7 m. 125-7°, S 1.3; 1-bromo-2-naphthalene m. 155-6°, S 0.5; 6-fluoro-2-naphthalene m. 145-6°, S 1.2; 3-chloro-2-naphthalene m. 150-1°, S 0.3; 6-bromo-2-naphthalene m. 167-8°, S 0.9; 5,6,7,8-tetrahydro-2-naphthalene m. 88-90°, S 0.9; 1-nitro-2-naphthalene m. 154-5°, S 0.9; 6-methoxy-2-naphthalene m. 160°, S 1.1; 1-acenaphthene m. 160°, S 1.1; 9-fluorene m. 127-8°, S 0.7; 2-phenanthrene m. 135-7°, S 0.5; 3-isomer m. 133-5°, S 0.5; 1-pyrrole m. 85-7°, S 0.9; 2-thiophene m. 66-7°, S 1.8; 2-furan oil, S 0.4; 2,6-dihydroxy-5-pyrimidine m. 271-2°, S 1; 2-methyl-4-hydroxy-5-pyrimidine m. 184°, S 0.9; 3,4-methylenedioxyphenyl m. 99-100°, S 1; 2-methyl-4-thiazole m. 93-4°, S 0.85; 4-methyl-2-thiazole m. 80-2°, S 0.9; 2-pyridine m. 93-4°, S 1; 3-isomer m. 94° S 1; 6-methyl-2-pyridine m. 49-50°, S 1; 2-benzyl-1-imidazole m. 177-9°, S 1; 3-quinoline m. 151-2°, S 1; 6-isomer m. 135°, S 1; 8-isomer m. 92-3°, S 1; 2-benzimidazole m. 185-90°, S 1; 5-isomer m. 160-2°, S 1; 2-hydroxy-5-benzimidazole m. 245-6°, S 1; 7-hydroxy-4-coumarin m. 114-16°, S 1; 9-xanthene m. 157-8°, S 0.8; 9-thiaxanthene m. 148-9°, S 0.7; 5-hydantoin m. 160-2°, S 0.9. Only a few of these compounds appeared to be utilized readily by the mold for the formation of new penicillins. Several of the compounds appeared to effect some increase in penicillin yield or to change the differential assay value of the crude penicillin produced in their presence.

As far as I know, this compound(305798-02-1)Category: dioxole can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Alberino, L. M.; Farrissey, W. J.; Sayigh, A. A. R. researched the compound: 4-Methyl-1-phenyl-2,3-dihydro-1H-phosphole 1-oxide( cas:707-61-9 ).Safety of 4-Methyl-1-phenyl-2,3-dihydro-1H-phosphole 1-oxide.They published the article 《Preparation and properties of carbodiimide oligomers》 about this compound( cas:707-61-9 ) in Polymer Preprints (American Chemical Society, Division of Polymer Chemistry). Keywords: carbodiimide oligomer preparation property; phospholene oxide polymerization catalyst; polycarbodiimide oligomer. We’ll tell you more about this compound (cas:707-61-9).

Polycarbodiimides of limited mol. weight were prepared by reacting a difunctional isocyanate, e.g. 4,4′-diisocyanatodiphenylmethane, with a monofunctional isocyanate, e.g. phenyl isocyanate, as terminating agent in the presence of 1-phenyl-3-methyl-2-phospholene-1-oxide [707-61-9] catalyst to give a carbodiimide oligomer [33970-08-0] and CO2. The polymer chains were terminated with end-groups which were equal in thermal stability to the backbone of the polymer. The polymers prepared in the oligomer range having a ratio of equivalents of difunctional to monofunctional isocyanate (r) of 6/1 to 20/1 had mech. properties very nearly equal to those of high mol. weight unterminated polymers. The terminated polymers had a lower melt viscosity than the unterminated polymers and hence a greater ease of processing.

As far as I know, this compound(707-61-9)Safety of 4-Methyl-1-phenyl-2,3-dihydro-1H-phosphole 1-oxide can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

Electric Literature of C5H5ClN2. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: 5-Chloropyridin-3-amine, is researched, Molecular C5H5ClN2, CAS is 22353-34-0, about Boric Acid Catalyzed Direct Amidation between Amino-Azaarenes and Carboxylic Acids. Author is Yun, Fan; Cheng, Chunhui; Zhang, Jing; Li, Jingxuan; Liu, Xia; Xie, Rui; Tang, Pingwah; Yuan, Qipeng.

A novel and facile boric acid-catalyzed direct amidation between amino-azaarene compounds and carboxylic acids was developed. The amidation proceeded cleanly and provided good to excellent yields of the desired amides. Boric acid is a green and inexpensive catalyst. It was also found that N,N,N’,N’-tetramethylpropane-1,3-diamine acted as an additive accelerating this boric acid-catalyzed amidation. A mixed acid anhydride was postulated to be the active intermediate responsible for this successful amidation. This direct amidation was an atom- and step-economical reaction.

As far as I know, this compound(22353-34-0)Electric Literature of C5H5ClN2 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem