Day: April 20, 2022

Related Products of 707-61-9. The reaction of aromatic heterocyclic molecules with protons is called protonation. Aromatic heterocycles are more basic than benzene due to the participation of heteroatoms. Compound: 4-Methyl-1-phenyl-2,3-dihydro-1H-phosphole 1-oxide, is researched, Molecular C11H13OP, CAS is 707-61-9, about Synthesis of photosensitive polycarbodiimide. Author is Mochizuki, Amane; Takeshi, Kazumasa; Haba, Osamu; Kato, Sadao; Ueda, Mitsuru.

A neg.-working photosensitive polymer based on polycarbodiimide (PCD) and {[(4,5-dimethoxy-2-nitrobenzyl)oxy]carbonyl}-2-methylpiperidine (I) as a photoamine generator(PAG) has been developed. The end-capped PCDs with number average mol. weights of 1500 and 2500 were prepared by polycondensation of tolylene 2,4-diisocyanate (TDI) in the presence of m-tolyl isocyanate and 3-methyl-1-phenyl-2-phospholene-1-oxide as an end-capping agent and a catalyst, resp. PCDs were amorphous and soluble in common organic solvents, such as toluene, chloroform, and cyclohexanone. Thermogravimetry of the polymers showed good thermal stability, indicating that a 10% weight loss of the polymers was at 480° in nitrogen. The PCD films were transparent above 360 nm. The PCD containing I showed a sensitivity of 225 mJ/cm2 and a contrast of 1.5, when it was post-baked at 90°C sec, followed by development with toluene at 25°C.

Although many compounds look similar to this compound(707-61-9)Related Products of 707-61-9, numerous studies have shown that this compound(SMILES:CC1=CP(CC1)(C2=CC=CC=C2)=O), has unique advantages. If you want to know more about similar compounds, you can read my other articles.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

COA of Formula: C34H22NO2P. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 5-(11bR)-Dinaphtho[2,1-d:1′,2′-f][1,3,2]dioxaphosphepin-4-yl-5H-dibenz[b,f]azepine, is researched, Molecular C34H22NO2P, CAS is 1265884-98-7, about Enantio- and Diastereoselective Spiroketalization Catalyzed by Chiral Iridium Complex. Author is Hamilton, James Y.; Rossler, Simon L.; Carreira, Erick M..

In the presence of [Ir(cod)Cl]2 and a nonracemic dibenzazepinyl dinaphthodioxaphosphepine ligand, hydroxy ketone-containing allylic carbonates such as I (Boc = t-BuO2C) underwent distereoselective and enantioselective spiroketalization reactions to yield spiroketals such as II in 62-99% yields, 1.2:1->25:1 dr (the diastereoselectivity of the 1.2:1 dr reaction was improved to >25:1 dr on equilibration with acid), and in 94:6->99:1 er. The protocol was effective for the preparation of a collection of spiroketals of various ring sizes and substituents, including heteroatoms, with high enantio- and diastereoselectivity. Furthermore, the enantio- and diastereoselective spiroketalization was used in tandem with an acetalization reaction and a second spiroketalization reaction to exert concomitant stereocontrol over addnl. stereogenic centers. The structure of a nonracemic spiropyranpyrrolopyran was determined by X-ray crystallog.

Although many compounds look similar to this compound(1265884-98-7)COA of Formula: C34H22NO2P, numerous studies have shown that this compound(SMILES:N1(P2OC3=CC=C4C=CC=CC4=C3C5=C6C=CC=CC6=CC=C5O2)C7=CC=CC=C7C=CC8=CC=CC=C81), has unique advantages. If you want to know more about similar compounds, you can read my other articles.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

Reference of 2-Bromomethyl-1,3-dioxolane. The protonation of heteroatoms in aromatic heterocycles can be divided into two categories: lone pairs of electrons are in the aromatic ring conjugated system; and lone pairs of electrons do not participate. Compound: 2-Bromomethyl-1,3-dioxolane, is researched, Molecular C4H7BrO2, CAS is 4360-63-8, about Synthesis of lesinurad via a multicomponent reaction with isocyanides and disulfides. Author is Li, Yaoqi; Sun, Zhihua.

An efficient synthesis of Lesinurad I, a selective uric acid reabsorption inhibitor was developed via reaction starting from 4-cyclopropylnaphthalen-1-amine hydrochloride. The route to synthesis of compound I avoided the use of thiophosgene and the formation of thiols. The key reaction in this synthesis was construction of the 1,2,4-triazole ring in 72% yield. Compound I is obtained in 45% yield over 5 steps.

Although many compounds look similar to this compound(4360-63-8)Reference of 2-Bromomethyl-1,3-dioxolane, numerous studies have shown that this compound(SMILES:BrCC1OCCO1), has unique advantages. If you want to know more about similar compounds, you can read my other articles.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

The chemical properties of alicyclic heterocycles are similar to those of the corresponding chain compounds. Compound: 5-(11bR)-Dinaphtho[2,1-d:1′,2′-f][1,3,2]dioxaphosphepin-4-yl-5H-dibenz[b,f]azepine, is researched, Molecular C34H22NO2P, CAS is 1265884-98-7, about Direct enantioselective allylic substitution of 4-hydroxycoumarin derivatives with branched allylic alcohols via iridium catalysis, the main research direction is hydroxy arylallyl chromenone preparation enantioselective; hydroxycoumarin alc allylic substitution iridium catalyst.Electric Literature of C34H22NO2P.

A highly efficient direct asym. allylic substitution (AAS) reaction of 4-hydroxycoumarin derivatives with branched allylic alcs. was realized by combining a chiral iridium complex catalyst with a Lewis acid under mild reaction conditions, delivering various hydroxy(arylallyl)-2H-chromen-2-ones I [R = H, 7-OMe, 6-Cl, etc.; Ar = Ph, 2-naphthyl, 2-thienyl, etc.; X = NMe, O, S] in remarkably high yields and excellent enantioselectivities. The salient features of this transformation included mild reaction conditions, general substrate scope, good functional group tolerance, high yields, excellent selectivities and easy scale-up. Furthermore, the obtained products were readily transformed into several kinds of bioactive compounds

Although many compounds look similar to this compound(1265884-98-7)Electric Literature of C34H22NO2P, numerous studies have shown that this compound(SMILES:N1(P2OC3=CC=C4C=CC=CC4=C3C5=C6C=CC=CC6=CC=C5O2)C7=CC=CC=C7C=CC8=CC=CC=C81), has unique advantages. If you want to know more about similar compounds, you can read my other articles.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

Reference of Methyl 5-fluoro-3-pyridinecarboxylate. The protonation of heteroatoms in aromatic heterocycles can be divided into two categories: lone pairs of electrons are in the aromatic ring conjugated system; and lone pairs of electrons do not participate. Compound: Methyl 5-fluoro-3-pyridinecarboxylate, is researched, Molecular C7H6FNO2, CAS is 455-70-9, about Accessing (Multi)Fluorinated Piperidines Using Heterogeneous Hydrogenation. Author is Wagener, Tobias; Heusler, Arne; Nairoukh, Zackaria; Bergander, Klaus; Daniliuc, Constantin G.; Glorius, Frank.

Fluorinated piperidines are desirable motifs for pharmaceutical and agrochem. research. Nevertheless, general synthetic access remains out of reach. Herein, we describe a simple and robust cis-selective hydrogenation of abundant and cheap fluoropyridines to yield a broad scope of (multi)fluorinated piperidines. This protocol enables the chemoselective reduction of fluoropyridines while tolerating other (hetero)aromatic systems using a com. available heterogeneous catalyst. Fluorinated derivatives of important drug compounds are prepared, and a straightforward strategy for the synthesis of enantioenriched fluorinated piperidines is disclosed.

Although many compounds look similar to this compound(455-70-9)Reference of Methyl 5-fluoro-3-pyridinecarboxylate, numerous studies have shown that this compound(SMILES:COC(=O)C1=CC(F)=CN=C1), has unique advantages. If you want to know more about similar compounds, you can read my other articles.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Biosynthesis of penicillins. VI. N-2-Hydroxyethyl amides of some polycyclic and heterocyclic acetic acids as precursors》. Authors are Jones, Reuben G.; Soper, Quentin F.; Behrens, Otto K.; Corse, Joseph W..The article about the compound:2-Bromo-6-(bromomethyl)naphthalenecas:305798-02-1,SMILESS:BrCC1=CC2=CC=C(Br)C=C2C=C1).Reference of 2-Bromo-6-(bromomethyl)naphthalene. Through the article, more information about this compound (cas:305798-02-1) is conveyed.

2,6-MeC10H6NH2 (78 g.) in 80 mL. concentrated HCl and 200 mL. H2O at 0°, treated at 5° with 35 g. NaNO2 in 50 mL. H2O and, after 0.5 h., with 130 g. ice-cold 42% HBF4, gives 90% of the 2-diazonium fluoroborate, decomposition of which yields 69% 2-methyl-6-fluoronaphthalene (I), m. 77°. I (40 g.) at 210°, treated (15 min.) with 40 g. Br (with illumination with a 100-w. lamp), gives 82% 2-(bromomethyl)-6-fluoronaphthalene (II), b2 125-30°, m. 53°. II (48 g.), added to a refluxing solution of 30 g. KCN in 60 mL. H2O and 200 mL. EtOH, the EtOH removed after refluxing 4 h., 500 mL. H2O added, the solution extracted with ether, and the residue from the ether boiled 5 h. with 40 g. KOH in 40 mL. H2O and 200 mL. EtOH, gives 74% 6-fluoro-2-naphthaleneacetic acid, m. 138-9° (Me ester, b2 163-6°, m. 48-9°). 2,6-MeC10H6NH2 (63 g.) in 100 mL. H2O and 700 g. 48% HBr, treated (3-4 h.) at 5° with 45 g. NaNO2 in 75 mL. H2O and the diazonium solution poured (10 min.) into 170 g. CuBr in 800 mL. 48% HBr at 70-80°, gives 40% 6-bromo-2-methylnaphthalene (III), m. 142° III yields 80% 6-bromo-2-(bromomethyl)naphthalene, m. 124-5° this gives 69% 6-bromo-2-naphthaleneacetic acid, m. 175-6° (Me ester, b2 187-93°, m. 67-9°). 3,2-ClC10H6CHO (32.5 g.), 35 g. hippuric acid, 14.5 g. anhydrous AcONa, and 50 mL. Ac2O, heated on the steam bath 1 h., give 75% 2-phenyl-4-(3-chloro-2-naphthylmethylene)-5(4H)-oxazolone (IV), bright yellow, m. 192° 40 g. IV in 200 mL. 10% NaOH, refluxed 9 h., the mixture diluted to 1500 mL. with H2O, washed with ether, the aqueous solution treated with 20 mL. 12.5 N NaOH and 15 mL. 30% H2O2, allowed to stand overnight, the filtrate acidified with HCl, extracted with ether-C6H6, and the residue esterified, gives 37% Me 3-chloro-2-naphthaleneacetate, b2 163-5°, m. 49-50° the free acid m. 193-4°. 6,2-MeOC10H6Ac (100 g.), 25.5 g. S, and 87 g. morpholine, heated 18 h. at 140°, part of the morpholine removed in vacuo, 250 mL. AcOH and 350 mL. concentrated HCl added, and the mixture refluxed 24 h., give 67% 6-methoxy-2-naphthaleneacetic acid, m. 203-5° (Me ester, b1 192-3°, m. 86°, 73%). 5,6,7,8-Tetrahydro-2-acetonaphthone (50 g.), 13 g. S, and 40 mL. morpholine, refluxed overnight, 400 mL. concentrated HCl and 300 mL. H2O added, and the mixture again refluxed overnight, followed by esterification with EtOH and H2SO4, give Et 5,6,7,8-tetrahydro-2-naphthaleneacetate, b0.5 140-3°. 2-Acetylphenanthrene (13.2 g.), 3.2 g. S, and 10.5 g. morpholine, heated 15 h. at 160°, the mixture treated with 150 mL. AcOH and 36% HCl, and refluxed 24 h., give 81% 2-phenanthreneacetic acid, m. 187-8° the 3-isomer m. 174-5°, 84% (Me ester, b1.5 203-5°, 89%). 8-(Bromomethyl)quinoline (120 g.) in 250 mL. warm EtOH, added (0.5 h.) to 50 g. KCN in 100 mL. warm H2O and the mixture refluxed 1.5 h., gives 78% 8-(cyanomethyl)quinoline, m. 86-7°; hydrolysis with aqueous alc. KOH and esterification give 91% Et 8-quinolineacetate, b3 158-60°. Et 3-quinolinecarboxylate (70 g.), 62 g. AcOEt, and EtONa (12 g. Na and 0.52 mol absolute EtOH) in 100 cc. dry C6H6, refluxed 20 h., the cooled solution poured onto ice, diluted to 5 l. with H2O, treated with 50 mL. 12 N NaOH, washed with two 300 mL. portions of ether, and the aqueous solution neutralized with dilute H2SO4 and extracted with two 500-mL. portions of ether, give 75% Et 3-quinolylformylacetate, m. 84° 27 g. of the keto ester in 125 g. 25% H2SO4, heated 30 min. at 100°, gives 95% 3-acetylquinoline (V). V (7 g.), 5 g. S, 50 mL. (NH4)2S, and 25 mL. H2O, heated 20 h. at 145-50°, the residue extracted with two 300-mL. portions boiling 5% HCl, the solution refluxed 3 h., and the crude acid esterified, give 19% Et 3-quinolineacetate, b2.5 140-2°. pH2NC6H4CH2CO2H (46 g.), 10.5 g. FeSO4, 115 g. C3H5(OH)3, 23 g. PhNO2, and 53 mL. concentrated H2SO4, boiled 5 h., give 37 g. crude acid which, esterified with EtOH and HCl, gives 39% Et 6-quinolineacetate, b3 160° the free acid (VI) m. 218-20°. Et 6-quinolinecarboxylate and AcOEt, condensed with EtONa, give 87% Et 6-quinolineacetate, hydrolysis of which with 25% H2SO4 at 100° gives 90% 6-acetylquinoline, m. 76° the Willgerodt reaction gives 87.5% VI. 3,4 O2N(H2N)C6H3CO2H (108 g.) in 350 mL. concentrated HCl, treated with 125 g. Sn in portions (temperature below 90°), gives 87% (3,4-diaminophenyl)acetic acid-2HCl (VII), m. 222-4° (decomposition); Et ester-2HCl (VIII), m. 185-7° (decomposition); 3 g. VII and 20 mL. 98-100% HCO2H, heated several hrs., give 100% 5-benzimidazoleacetic acid-HCl, m. 240-2° the Et ester m. 65-6°, 75%. VIII (14 g.) in 200 mL. ice H2O, treated with excess COCl2, gives 95% Et 2-hydroxy-5-benzimidazoleacetate, m. 208-9°. NCCH2CO2Et (113 g.) and 15 g. (HOCH2CH2)3N in 100 mL. absolute EtOH, treated with a slow stream of H2S, the mixture poured after 5 days into ice-H2O, and 38 g. of the resulting oil and 23.1 g. ClCH2Ac in 300 cc. anhydrous ether kept 4 days, give 20.6 g. Et 4-methyl-2-thiazoleacetate, b17 136-9°. Thiaxanthydrol (42 g.), 30 g. CH2(CO2H)2, and 80 mL. C5H5N, heated 2 h. at 60-70° and 2 h. at 90-5° and the liquid poured into 600 mL. 2 N HCl, give 90% 9-thiaxantheneacetic acid, m. 167-8° (Me ester, b2 182-4°). The Ag salt of 2-benzylimidazole (53 g.) and 50 g. BrCH2CO2Et in 200 mL. xylene, refluxed 48 h., give 25.4% of the Et ester, m. 70-70.5°, of 2-benzyl-1-imidazoleacetic acid, m. 173-4°. Me 1-acenaphtheneacetate, b4 176-8°. N-2-Thienylacetyl-DL-valine m. 110-12°. Amides were prepared by heating the Me or Et ester of the various acids with a slight excess of HOCH2CH2NH2 at 100-150° for several hrs.; R in RCH2CONHCH2CH2OH is given, together with S (see part V). 2-C10H7 m. 125-7°, S 1.3; 1-bromo-2-naphthalene m. 155-6°, S 0.5; 6-fluoro-2-naphthalene m. 145-6°, S 1.2; 3-chloro-2-naphthalene m. 150-1°, S 0.3; 6-bromo-2-naphthalene m. 167-8°, S 0.9; 5,6,7,8-tetrahydro-2-naphthalene m. 88-90°, S 0.9; 1-nitro-2-naphthalene m. 154-5°, S 0.9; 6-methoxy-2-naphthalene m. 160°, S 1.1; 1-acenaphthene m. 160°, S 1.1; 9-fluorene m. 127-8°, S 0.7; 2-phenanthrene m. 135-7°, S 0.5; 3-isomer m. 133-5°, S 0.5; 1-pyrrole m. 85-7°, S 0.9; 2-thiophene m. 66-7°, S 1.8; 2-furan oil, S 0.4; 2,6-dihydroxy-5-pyrimidine m. 271-2°, S 1; 2-methyl-4-hydroxy-5-pyrimidine m. 184°, S 0.9; 3,4-methylenedioxyphenyl m. 99-100°, S 1; 2-methyl-4-thiazole m. 93-4°, S 0.85; 4-methyl-2-thiazole m. 80-2°, S 0.9; 2-pyridine m. 93-4°, S 1; 3-isomer m. 94° S 1; 6-methyl-2-pyridine m. 49-50°, S 1; 2-benzyl-1-imidazole m. 177-9°, S 1; 3-quinoline m. 151-2°, S 1; 6-isomer m. 135°, S 1; 8-isomer m. 92-3°, S 1; 2-benzimidazole m. 185-90°, S 1; 5-isomer m. 160-2°, S 1; 2-hydroxy-5-benzimidazole m. 245-6°, S 1; 7-hydroxy-4-coumarin m. 114-16°, S 1; 9-xanthene m. 157-8°, S 0.8; 9-thiaxanthene m. 148-9°, S 0.7; 5-hydantoin m. 160-2°, S 0.9. Only a few of these compounds appeared to be utilized readily by the mold for the formation of new penicillins. Several of the compounds appeared to effect some increase in penicillin yield or to change the differential assay value of the crude penicillin produced in their presence.

Compounds in my other articles are similar to this one(2-Bromo-6-(bromomethyl)naphthalene)Reference of 2-Bromo-6-(bromomethyl)naphthalene, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

Heterocyclic compounds can be divided into two categories: alicyclic heterocycles and aromatic heterocycles. Compounds whose heterocycles in the molecular skeleton cannot reflect aromaticity are called alicyclic heterocyclic compounds. Compound: 4360-63-8, is researched, Molecular C4H7BrO2, about Ruthenium(II)biscarboxylate-Catalyzed Hydrogen-Isotope Exchange by Alkene C-H Activation, the main research direction is alkene deuterium exchange ruthenium biscarboxylate catalyst.Name: 2-Bromomethyl-1,3-dioxolane.

Ruthenium(II) biscarboxylate catalysis enabled efficient hydrogen isotope exchange of acrylic C-H bonds with user-friendly D2O. The C-H labeling was characterized by excellent positional selectivity and a broad functional group tolerance. The deuteration was successfully conducted on 55 mmol scale with TONs of >1000, while mechanistic studies provided insights into ruthenium(II) oxidase catalysis. The obtained deuterated alkenes enabled the synthesis of labeled standards for mass spectrometry of irradiated foodstuffs.

Compounds in my other articles are similar to this one(2-Bromomethyl-1,3-dioxolane)Name: 2-Bromomethyl-1,3-dioxolane, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

HPLC of Formula: 707-61-9. So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic. Compound: 4-Methyl-1-phenyl-2,3-dihydro-1H-phosphole 1-oxide, is researched, Molecular C11H13OP, CAS is 707-61-9, about Synthesis and application characteristics of carbodiimide crosslinking agent.

Carbodiimide crosslinking agent was synthesized by 1,6-hexamethylene diisocyanate(HDI), polyethylene glycol monomethyl ether(MPEG Mn=350), N,N- dimethylethanolamine(DMEA) and 3-methyl-1-phenyl-2-phospholene-1-oxide. The influences of reaction temperature, the dosage of catalyst, nitrogen jet velocity, n(MPEG350)/n(DMEA)(mole ratio) and the pH value of water on the polymer properties were studied. This crosslinking agent was applied to acrylic acid modified collagen finishing agent. After adding crosslinking agent, the properties of film are better with the increase of flexibility resistance and tensile strength, swelling rate decreases and the brightness degree decreases a little.

Compounds in my other articles are similar to this one(4-Methyl-1-phenyl-2,3-dihydro-1H-phosphole 1-oxide)HPLC of Formula: 707-61-9, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

Epoxy compounds usually have stronger nucleophilic ability, because the alkyl group on the oxygen atom makes the bond angle smaller, which makes the lone pair of electrons react more dissimilarly with the electron-deficient system. Compound: 2-Bromomethyl-1,3-dioxolane, is researched, Molecular C4H7BrO2, CAS is 4360-63-8, about Transition-Metal-Free Deconstructive Lactamization of Piperidines.Recommanded Product: 4360-63-8.

One of the major challenges in organic synthesis is the activation or deconstructive functionalization of unreactive C(sp3)-C(sp3) bonds, which requires using transition or precious metal catalysts. We present here an alternative: the deconstructive lactamization of piperidines without using transition metal catalysts. To this end, we use 3-alkoxyamino-2-piperidones, which were prepared from piperidines through a dual C(sp3)-H oxidation, as transitory intermediates. Exptl. and theor. studies confirm that this unprecedented lactamization occurs in a tandem manner involving an oxidative deamination of 3-alkoxyamino-2-piperidones to 3-keto-2-piperidones, followed by a regioselective Baeyer-Villiger oxidation to give N-carboxyanhydride intermediates, which finally undergo a spontaneous and concerted decarboxylative intramol. translactamization.

Compounds in my other articles are similar to this one(2-Bromomethyl-1,3-dioxolane)Recommanded Product: 4360-63-8, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem

Application of 7524-52-9. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: H-Trp-OMe.HCl, is researched, Molecular C12H15ClN2O2, CAS is 7524-52-9, about A fast and direct iodide-catalyzed oxidative 2-selenylation of tryptophan. Author is Gao, Yu-Ting; Liu, Shao-Dong; Cheng, Liang; Liu, Li.

A metal-free 2-selenylation of tryptophan derivatives is reported, where the use of iodide as the catalyst and oxone as the oxidant is key to obtain high yields. Various functional groups within the di-selenyl and the indole ring are tolerated, and no racemization is generally observed

Compounds in my other articles are similar to this one(H-Trp-OMe.HCl)Application of 7524-52-9, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
1,3-Benzodioxole – Wikipedia,
Dioxole | C3H4O2 – PubChem