Day: August 24, 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.80841-78-7,4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one,as a common compound, the synthetic route is as follows.

Example 5; Preparation of trityl olmesartan medoxomilTo dimethyl sulphoxide (800 ml), sodium hydroxide powder (50 gms) was added under nitrogen atmosphere and stirred at 20-250C for 10 minutes. To this, 4-( 1 -hydroxy- 1- methylethyl)-2-propyl-imidazole-5-ethyl carboxylate (100 gms) was added at 20-250C. 5- (4′-bromomethyl-biphenyl)-2-yl-1 -trityl tetrazole (270 gms) was added slowly at 20-250C, and the reaction mass was stirred at 20-250C for 12 hours. Further 10% sodium hydroxide solution (100 ml) was added to the reaction mass at 20-250C. The temperature of the reaction mass was raised to 40-450C, the contents stirred at 40-450C for 2 hours and 5- methyl-2-oxo-1 ,3-dioxane-4-yl)methyl chloride (160 gms) was added slowly at 45-5O0C over a period of 45 minutes. The contents were stirred at 45-5O0C for 2 hours. The reaction mass was then cooled to 0-50C, stirred for 1 hour at 0-50C, filtered and slurried in water (1.0 It) at 40-450C for 1 hour, filtered at 4O0C and dried at 4O0C. To the dried material, ethyl acetate (2.5 It) was added, heated to 50-550C for complete dissolution, ethyl acetate was distilled off to 1.0 It stage under vacuum at 45-5O0C. The contents were cooled to 0-50C, stirred at 0-50C for 3 hours, filtered, washed with chilled methanol (100 ml) and dried under vacuum at 40-450C to give 250 gms of the title compound. Purity by HPLC : > 99%

As the paragraph descriping shows that 80841-78-7 is playing an increasingly important role.

Reference£º
Patent; CIPLA LIMITED; CURTIS, Philip, Anthony; WO2008/43996; (2008); A2;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.80841-78-7,4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one,as a common compound, the synthetic route is as follows.

To a solution of the compound of Formula IV (5.0 g) in toluene (40 mL), dimethylacetamide (10 mL) is added, followed by addition of sodium hydroxide (1.2 g) and N,N-diisopropylamine (3.7 g) at 25-35C. The mixture is stirred at 40- 45C for 4 hours. 5-Methyl-2-oxo-(1 ,3-dioxolene-4-yl)methyl chloride (1.5 g) and tetrabutylammonium bromide (0.5 g) are added at 40-450C. The mixture is stirred at 60-70C for 8 hours. The mass is cooled to 25-35C, water (50 mL) is added, and the pH is adjusted to about 6-7 by adding 10% aqueous HCI. The layers are separated. The aqueous layer is extracted with toluene (25 mL). The organic layers are combined and washed with water (25 mL). The solvent is distilled under reduced pressure. Methanol (25 mL) is added to the residue. The mixture is cooled to 0-50C and stirred at that temperature for 45 minutes. The formed solid is filtered, washed with methanol (10 mL) and dried for 45 minutes under vacuum (yield 3.0 g).

The synthetic route of 80841-78-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; DR. REDDY’S LABORATORIES LTD.; DR. REDDY’S LABORATORIES, INC.; KOLLA, Naveen Kumar; MANNE, Nagaraju; NAREDLA, Anitha; SHINDE, Sachin Gulabrao; WO2011/14611; (2011); A2;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 2; 36.0 g (50.3 mmol) ethyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-(4-[2-(trityltetrazol-5-yl)-phenyl]phenyl}-methyl imidazole-5-carboxylate (Va) and 3.0 g (75.4 mmol) of NaOH were suspended in 413 ml dimethylacetamide. The suspension was then stirred at room temperature for 20 h and after that 6.9 g (50.3 mmol) of K2CO3 were added. The mixture was cooled to 0C and solution of 15.4 g (70.4 mmol) 4-chloromethyl-5-methyl-2-oxo-1,3-dioxolene in 39 ml of dimethylacetamide were slowly added. The mixture was slowly heated to 50C and stirred at this temperature for 2 h. After esterification was completed, the mixture was cooled to 10 C and poured into a mixture of 625 ml of ethyl acetate and 625 ml of 10 % NaCl, and stirred at 25 C for 15 min. The phases were separated and organic phase was washed 2x with 500 ml of 10 % NaCl, dried over Na2SO4 and filtered. The filtrate was concentrated up to ? (approximately 270 g) at reduced pressure. To the resulting solution, 80 ml of ethanol and 8.3 ml (100 mmol) of conc. HCl were added and stirred at 24-26C for 3h. To the cooled mixture 600 ml of water was added and pH of the suspension was estimated to 5 by addition of 5 M NaOH. The phases were stirred for 15 min and separated. Water phase was reextracted with 150 ml of ethyl acetate. Collected organic phases were dried over Na2SO4, filtered and concentrated under reduced pressure. 560 ml of ethyl acetate were added and the mixture was evaporated again. After that, 300 ml of ethyl acetate were added and the mixture was cooled to 20 C and stirred for 1h, filtered off and washed with 20 ml of fresh ethyl acetate. The yield of the product (I) was 21 g (75 %).

As the paragraph descriping shows that 80841-78-7 is playing an increasingly important role.

Reference£º
Patent; KRKA, tovarna zdravil, d.d., Novo mesto; EP1816131; (2007); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

80841-78-7, 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 7; Preparation of Trityl Olmesartan Medoxomil4-(1-Hydroxy-1-methylethyl)-2-propyl-1-{4-[2-(trityltetrazol-5-yl)phenyl]phenyl}methylimidazole-5-carboxylic acid dehydrate (100 g) was suspended in acetone (1 L) & heated to reflux; the solution obtained was added to suspension of potassium carbonate (15 g), potassium iodide (6 g) & 4-chloromethyl-5-methyl-1,3-dioxol-2-one (35 g) in acetone (500 mL) at reflux temperature. Reaction mass was refluxed for 2-6 hrs. After competition of reaction, the reaction mass was filtered & the acetone was distilled from combined mother liquor. The residue obtained was dissolved in toluene (1 L) toluene layer was washed with brine (3¡Á250 mL). Toluene was removed under reduced pressure & residue thus obtained was recrystallized from methanol to give trityl OlmesartanMedoxomil (100 g).HPLC purity=99.5%

80841-78-7 4-(Chloromethyl)-5-methyl-1,3-dioxol-2-one 9855518, aDioxole compound, is more and more widely used in various.

Reference£º
Patent; Ramanjaneyulu, Gorantla Seeta; Mohan, Bandari; Ray, Purna Chandra; Sethi, Madhuresh Kumar; Rawat, Vijendra Singh; Krishna, Yerramalla Raja; Lakshminarayana, Vemula; Srinivas, Mamidi; US2009/281327; (2009); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

37830-90-3, 4,5-Dimethyl-1,3-dioxol-2-one is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 26 Preparation of 5-methyl-4-hydroxymethyl-2-oxo-1,3-dioxolene A mixture of 4,5-dimethyl-2-oxo-1,3-dioxolene (1 mmol) and selenium dioxide (2.5 mmol) in dioxane was heated at reflux for 1 h. Evaporation, extraction and chromatography gave 5-methyl-4-hydroxymethyl-2-oxo-1,3-dioxolene as a yellow oil. TLC: Rf=0.5, 5percent MeOH-dichloromethane.

The synthetic route of 37830-90-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Metabasis Therapeutics, Inc.; US6054587; (2000); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

144690-92-6, Triphenyl methyl olmesartan is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of trityl olmesartan medoxomil (4.0 g), methanol (20 mL), and water (10 mL) is stirred at 25-35C for 15 minutes. Aqueous HCI (1 mL) is added drop-wise at 25-35C. The mixture is cooled to 0-50C. Water (30 mL) is added and the mixture is further stirred at 0-5C for 1 hour. The insoluble material is removed by filtration and the pH of the filtrate is adjusted to about 3-4 by adding 10% aqueous NaHCOs at 25-35C. The mixture is extracted with dichloromethane (3chi40 ml_). The organic layers are combined and washed with water (40 ml_). The solvent is distilled under reduced pressure below 400C. Ethyl acetate (10 ml_) is added to the residue and the mixture is heated to 50-600C and stirred for 1 hour. The mixture is cooled to 25-35C. The formed solid is filtered, washed with ethyl acetate (5 ml_), and dried under vacuum at 60-700C (yield 2.0 g).

As the paragraph descriping shows that 144690-92-6 is playing an increasingly important role.

Reference£º
Patent; DR. REDDY’S LABORATORIES LTD.; DR. REDDY’S LABORATORIES, INC.; KOLLA, Naveen Kumar; MANNE, Nagaraju; NAREDLA, Anitha; SHINDE, Sachin Gulabrao; WO2011/14611; (2011); A2;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

144690-92-6, Triphenyl methyl olmesartan is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of MTT in an organic solvent and water (20%) was heated for 4-8 hrs at reflux. When the solvents were either acetonitrile (ACN), isopropyl alcohol (IPA) or t-butanol (t-BuOH), 1 volume of water was added, and the reaction was stirred until the amount of MTT was less than 2%. The mixture was evaporated to dryness. Ethyl acetate (EtOAc, 1 volume) was added to the residue and then evaporated again (twice). The resulting solid was dissolved in EtOAc (12 vol) and heated to reflux. The solution was cooled (2 C.) and stirred for 2 hrs. The product was filtered, washed (EtOAc, 1 vol), and dried on vacuum (45 C.). Table 1 shows the process details with different organic solvents: TABLE 1 Total solvent Time Solvent(s) Volume Temperature ( C.) (hrs) pH ACN:H2O 5:1 + 1 85 7 4.89-4.3 IPA:H2O 5:1 + 1 85 7 4.62-4.25t-BuOH:H2O 5:1 + 1 85 7 4.78-4.28n-propanol:H2O 5:1 reflux 2.5 4.3n-BuOH:H2O 5:1 110 2.5 4.412-BuOH:H2O 5:1 100 3 4.5iso-penthanol:H2O 5:1 100 3 5DMA:H2O 5:1 100 4 4.5DMF:H2O 5:1 100 4 4.5

The synthetic route of 144690-92-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Hedvati, Lilach; Pilarsky, Gideon; Shenkar-Garcia, Natalia; US2006/148870; (2006); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37830-90-3,4,5-Dimethyl-1,3-dioxol-2-one,as a common compound, the synthetic route is as follows.

(1) 4-Bromomethyl-5-methyl-1,3-dioxolen-2-one [compound of formula (III) in which R is methyl and X is bromine] 3.42 g of 4,5-dimethyl-1,3-dioxolen-2-one [compound of formula (III’) in which R is methyl, prepared in accordance with the procedure described in Tetrahedron Letters, pages 1701-1704, (1972)] was dissolved in 150 ml of carbon tetrachloride. To the solution were added 5.34 g of N-bromosuccinimide and a catalytic amount of alpha,alpha’-azobisisobutyronitrile. The mixture was heated under reflux for 15 minutes. The reaction mixture was cooled with ice, and the insoluble materials were removed by filtration. The filtrate was concentrated under reduced pressure to give a syrupy residue. The residue was distilled under reduced pressure, and a fraction having a boiling point of 115¡ã to 120¡ã C./5 mmHg was recovered. Thus, 4.2 g (yield 73percent) of the captioned compound having the following properties was obtained as a colorless liquid. Elemental analysis for C5 H5 BrO3: IR (neat) nu(cm-1): near 18 25 (carbonyl). NMR (CCl4) delta(ppm): 2.10 (3H, –CH3, s), 4.10 (2H, –CH2 Br, s).

37830-90-3 4,5-Dimethyl-1,3-dioxol-2-one 142210, aDioxole compound, is more and more widely used in various.

Reference£º
Patent; Kanebo Ltd.; US4448769; (1984); A;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37830-90-3,4,5-Dimethyl-1,3-dioxol-2-one,as a common compound, the synthetic route is as follows.

To a solution of 4,5-dimethyl-1,3-dioxolene-2-one (TCI, 10 g, 88 mmol) and N- bromosuccinimide (Fluka, 15.69 g, 88 mmol) in carbon tetrachloride (250 mL) was added benzoyl peroxide (Acros, 500 mg, 2.1 mmol). The reaction mixture was then refluxed for 2.5 h after which time the volatiles were evaporated under vacuum. The resulting residue was triturated with some carbon tetrachloride, filtered and the solid cake was washed with carbon tetrachloride. The filtrate volatiles were removed under vacuum and the yellow oily residue was distilled under vacuum (2-5 torr) to give 4-bromomethyl-5-methyl-1,3-dioxolene-2-one 903 (8.35 g, b.p. 94-98 ¡ãC, 49percent) as a pale yellow oil. 1H NMR (CDCI3) 8 4.21 (s, 2H), 2.17 (s, 3H).

The synthetic route of 37830-90-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; RIGEL PHARMACEUTICALS, INC.; WO2005/97760; (2005); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem

37830-90-3, 4,5-Dimethyl-1,3-dioxol-2-one is a Dioxole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

NBS (19.58 g, 110 mmol) followed by AIBN (0.821 g, 5.00 mmol) were added to a stirred, room temperature mixture of 4,5-dimethyl-l,3-dioxol-2-one (5.70 g, 50 mmol) in benzene (300 mL) and the mixture was stirred at reflux for 1 h. Volatiles were removed.Chromatography over silicaeluting with 5-55% EtOAc/hexane afforded the desired product as a yellow oil.

37830-90-3 4,5-Dimethyl-1,3-dioxol-2-one 142210, aDioxole compound, is more and more widely used in various.

Reference£º
Patent; NICOX S.A.; MERCK & CO. INC.; ALMIRANTE, Nicoletta; MANDELLI, Valentino; NICOTRA, Alessia; BIONDI, Stefano; ONGINI, Ennio; SEBHAT, Iyassu; WO2010/15447; (2010); A1;,
1,3-Benzodioxole – Wikipedia
Dioxole | C3H4O2 – PubChem